Source for high-quality 3.5 mm stereo phono jack (PC mount)

[Some Guy]

Am looking for a high quality (ie reliable) 3.5 mm stereo phono jack
that's PC-board mountable. Basically am looking for the best such
connector available (for under $25 USD each QTY = 100 to 200).

Please post any suggestions (manufacturer, make/model #, etc).

Thanx.

 

[Walter Harley]

"Some Guy" <Some@Guy.com> wrote in message news:40EE1F17.D13D397D@Guy.com...

Am looking for a high quality (ie reliable) 3.5 mm stereo phono jack
that's PC-board mountable. Basically am looking for the best such
connector available (for under $25 USD each QTY = 100 to 200).

Please post any suggestions (manufacturer, make/model #, etc).

I've been searching for this for about three years now, talking to
distributors, looking through catalogs and web sites, and looking at
equipment. Like you, I'd be willing to pay a substantial price for it.
AFAICT, there are none. That is, there are no 3.5mm jacks that are anywhere
close in quality to what you can easily get in a 1/4" jack.

For instance, neither Switchcraft, Neutrik, nor Rean make a 3.5mm stereo
jack. (Switchcraft claims to, but based on the technical drawings and
samples I've received it looks like they actually buy bottom-of-the-line
Taiwanese product and reship it; don't bother.) Schurter, of all people,
make a 3.5mm jack that looks like the Rean stuff; but it is not
dimensionally compatible with a 3.5mm stereo plug, it's for some different
sort of plug that I've never encountered.

If you must use 3.5mm, then your best bet is probably something like the
Kobiconn fully-enclosed jacks with threaded bushing, as exemplified by
Mouser part # 161-3500. Of all the jacks I've tried, these seem to have the
best construction, best manufacturing consistency, and the most solid
contacts. Interestingly, it seems like the manufacturer name changes every
time a new catalog comes out, but the construction style, technical
drawings, etc. remain exactly the same - at Mouser, even the part number
remains the same.

By the way, if you possibly can, use something with a threaded bushing. I
can't tell you how much gear I've fixed that was mechanically secured only
by the solder joints, meaning that after a couple of years of plugs being
pushed in and pulled out, the solder joint cracks and the equipment becomes
intermittent. It is very important to mechanically secure the jack in a way
that does not transfer stress to the electrical connections.

 

[Watson A.Name - \"Watt Su]

"Walter Harley" <walterh@cafewalterNOSPAM.com> wrote in message
news:ccmk02$j63$0@216.39.172.65...

"Some Guy" <Some@Guy.com> wrote in message
news:40EE1F17.D13D397D@Guy.com...

Am looking for a high quality (ie reliable) 3.5 mm stereo phono jack
that's PC-board mountable. Basically am looking for the best such
connector available (for under $25 USD each QTY = 100 to 200).

Please post any suggestions (manufacturer, make/model #, etc).
[snip]

By the way, if you possibly can, use something with a threaded
bushing. I
can't tell you how much gear I've fixed that was mechanically secured
only
by the solder joints, meaning that after a couple of years of plugs
being
pushed in and pulled out, the solder joint cracks and the equipment
becomes
intermittent. It is very important to mechanically secure the jack in
a way
that does not transfer stress to the electrical connections.

Amen! And that goes for power supply connectors too.