Source for EL34 tubes

[Trevor Wilson]

I have a Michaelson Audio Odysseus amplifier in for service. One of the EL34
outputs is gassy. My customer is happy to replace the entire complement of
output tubes (4 per channel). What suggestions for decent quality tubes? The
source for those tubes?

TIA.


--
Trevor Wilson
www.rageaudio.com.au

 

[Phil Allison]

"Trevor Wilson" <trevor@rageaudio.com.au> wrote in message
news:3fb92e73$1@news.comindico.com.au...

I have a Michaelson Audio Odysseus amplifier in for service. One of the
EL34
outputs is gassy. My customer is happy to replace the entire complement of
output tubes (4 per channel). What suggestions for decent quality tubes?
The
source for those tubes?

** Sovtek EL34wxts are the best around where the B+ is over 400 volts -
get 'em from Arthur at Evatco in Melbourne.



.......... Phil

 

[Mark Harriss]

Trevor Wilson wrote:

I have a Michaelson Audio Odysseus amplifier in for service. One of the
EL34 outputs is gassy. My customer is happy to replace the entire
complement of output tubes (4 per channel). What suggestions for decent
quality tubes? The source for those tubes?

TIA.

WES have Electroharmonix and Sovtek available for a good rate, don't
think they know how to match though.

 

[tony.r]

Yes Arthur is the man for the job.

http://www.evatco.com.au/index.htm

He can match your tubes also.

tony.r
http://www.ncable.com.au/~tony.r/

 

[GM]

Since when did this NG become American.electronics -They are valves not
tubes !!


"tony.r" <spamthis@hotmail.com> wrote in message
news:3fbc2a68$1@news.comindico.com.au...

Yes Arthur is the man for the job.

http://www.evatco.com.au/index.htm

He can match your tubes also.

tony.r
http://www.ncable.com.au/~tony.r/

 

[Stan Blazejewski]

Nah, muso's have always called them 'tubes'. I suspect he's talking
about a guitar amp which is where most EL34's live these days.

On Fri, 21 Nov 2003 08:53:50 +1100, "GM"
<nospam_hathill2000@yahoo.com.au> wrote:

Since when did this NG become American.electronics -They are valves not
tubes !!


"tony.r" <spamthis@hotmail.com> wrote in message
news:3fbc2a68$1@news.comindico.com.au...
Yes Arthur is the man for the job.

http://www.evatco.com.au/index.htm

He can match your tubes also.

tony.r
http://www.ncable.com.au/~tony.r/

--

Australia isn't "down under", it's "off to one side"!

stanblaz@netspace.net.au
www.stanblaz.customer.netspace.net.au
www.cobracat.com (home of the Australian Cobra Catamaran)

 

[Phil Allison]

"Stan Blazejewski" <stanblaz@netspace.net.au> wrote in message
news:2h9urv8qhhtqkhq7iov239oekadjt8h006@4ax.com...

Nah, muso's have always called them 'tubes'.

** What bullshit - only Yank musos do that.


............ Phil


( Been servicing VALVE guitar amps for over 30 years )