C
chris
Guest
Hi !
Can anyone please help with information about how to use the
TT service OSD codes for this tunerless multistandard tv (monitor) ?
there are very few physical adjustments on this set - only focus,
G2 and Hstat as far as I can see.
I particularly need to know how to adjust the (R)GB cutoff and gain
values - and also undo pincushion distortion I've now got as a result
of issuing the TT49 code :-(
Some of the low TT codes are standard
13 is status
08 is exit with factory defaults
07 is ageing
TT46 puts a P onscreen and it is possible to enter a value here,
but it doesn't seem to change a test pattern
TT49 introduces massive pincushion distortion and re-issuing the code
doesn't get rid of it :-(
there don't appear to be any codes above 79 ( won't accept 8x or 9x)
the TTx0 codes cancel the current code
but there is no Menu ( either by pressing menu or using TT01)
the software is KXM03 version 3.63 (from TT13)
the chassis reports onscreen as AE2B (from TT76)
TIA
chris o.
Can anyone please help with information about how to use the
TT service OSD codes for this tunerless multistandard tv (monitor) ?
there are very few physical adjustments on this set - only focus,
G2 and Hstat as far as I can see.
I particularly need to know how to adjust the (R)GB cutoff and gain
values - and also undo pincushion distortion I've now got as a result
of issuing the TT49 code :-(
Some of the low TT codes are standard
13 is status
08 is exit with factory defaults
07 is ageing
TT46 puts a P onscreen and it is possible to enter a value here,
but it doesn't seem to change a test pattern
TT49 introduces massive pincushion distortion and re-issuing the code
doesn't get rid of it :-(
there don't appear to be any codes above 79 ( won't accept 8x or 9x)
the TTx0 codes cancel the current code
but there is no Menu ( either by pressing menu or using TT01)
the software is KXM03 version 3.63 (from TT13)
the chassis reports onscreen as AE2B (from TT76)
TIA
chris o.