B
Bob
Guest
Hello to all,
I have a Sony KP-53S25 Projection screen television which had developed a
board problem. The set seems to go out of sync and flexing the audio video
input output board stabilizes the problem. It seem like a cold solder joint
of some kind but I'll be damned if I can find it. The connector itself
doesn't seem to effect the board only the board itself. There is a part
mounted to the board a module of some sort designation # CM1101 which seems
the most sensitive. The numbers on the board are as follows 1-655-351-13 and
A-1373-511-562.
I do not have a service manual. It's been several years since I have done
consumer electronics repair and have no source for parts. Any information
would be appreciated.
Thanks
Bob
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
I have a Sony KP-53S25 Projection screen television which had developed a
board problem. The set seems to go out of sync and flexing the audio video
input output board stabilizes the problem. It seem like a cold solder joint
of some kind but I'll be damned if I can find it. The connector itself
doesn't seem to effect the board only the board itself. There is a part
mounted to the board a module of some sort designation # CM1101 which seems
the most sensitive. The numbers on the board are as follows 1-655-351-13 and
A-1373-511-562.
I do not have a service manual. It's been several years since I have done
consumer electronics repair and have no source for parts. Any information
would be appreciated.
Thanks
Bob
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----