Sony CDP-CX260 (Megadisk CDPlayer) Skipping problem

L

\\/\\Lightningslim

Guest
Hi Guys, I'm a infrequent lurker who used to be "In the trade."
I'm starting to get problems with my Sony CDP-CX260 - 200 disk CD player.
It's skipping occasionally (But more and more often) particularly on the first track of a CD.
It seems less of a problem after a few hours of use but can still skip.
If anyone has any ideas of what I should check out when I disassemble it, I'd appreciate any guidance from you knowledgeable chaps.
In a worst case scenario, can the laser be replaced outside a workshop (i.e., no set up equipment)?
And, are they available?
Many thanks to all

Mike
 
Many such problems are cured by routine maintenance - cleaning the lens,
cleaning / relubing gears, motors, sliders, etc.

Mark Z.


"\/\Lightningslim" <Lightning.slimHAT@ntlworld.com> wrote in message
news:bmea9v$l80v5$1@ID-139781.news.uni-berlin.de...
Hi Guys, I'm a infrequent lurker who used to be "In the trade."
I'm starting to get problems with my Sony CDP-CX260 - 200 disk CD player.
It's skipping occasionally (But more and more often) particularly on the
first track of a CD.
It seems less of a problem after a few hours of use but can still skip.
If anyone has any ideas of what I should check out when I disassemble it,
I'd appreciate any guidance from you knowledgeable chaps.
In a worst case scenario, can the laser be replaced outside a workshop
(i.e., no set up equipment)?
And, are they available?
Many thanks to all

Mike
 

Welcome to EDABoard.com

Sponsor

Back
Top