Solartron Schlumberger 7150 plus DMM manuals

[David C. Partridge]

Anyone have these in scanned form or know where I can get them? I am
prepared to pay a reasonable amount if necessary. I'm immediately looking
for the User Manual, but a Service and Calibration Manual would be pretty
useful as well.

--
Dave Partridge (remove xwy from replyto email address)

 

[Joerg Hau]

Hi,

Anyone have these in scanned form or know where I can get them?

This seems to be a pretty frequent question ;-)

A while ago some very friendly soul from the UK sent me the User Manual for
both the 7150 and the 7150plus as scanned images on CD ... and in the
meantime I have converted these to PDF.

I am prepared to pay a reasonable amount if necessary.

I can send you said CD free of charge (you pay just the shipping cost), but
there is also the possibility to make the PDF available. My only condition
is that if you re-distribute it, do it under the same condition: free of
charge.

Since these are prepared from high-resolution scans, expect a download of
60+ MB per manual.

I'm immediately looking for the User Manual, but a Service and
Calibration Manual would be pretty useful as well.

The calibration (you will need GPIB) is described in the User Manual. But
indeed, if someone has the Service/Maintenance manual for the 7150 to
share, please let me know ;-)

(If you are looking to control the 7150 via GPIB, I have some code on my
website.)

Cheers + HTH,

- Joerg



--
joerg dot hau at swissonline dot ch * Lausanne, Switzerland
http://homepage.sunrise.ch/mysunrise/joerg.hau/
"All standard disclaimers apply".
remove the obvious from my address to reply

 

[David C. Partridge]

"Joerg Hau" <nospam.joerg.hau@swissonline.ch> wrote in message
news:t8cb53-186.ln1@celeron.localnet...

Since these are prepared from high-resolution scans, expect a download of
60+ MB per manual.

Joerg,

Is there a location I can download them from? I have a fast ADSL link, so
60+MB won't be a problem.

If not, what would the postage cost to UK (and how to pay it)? Do you take
PayPal?

Many thanks
Dave

 

[Joerg Hau]

On Wednesday 23 November 2005 10:22, David C. Partridge wrote:

Since these are prepared from high-resolution scans, expect a download
of 60+ MB per manual.

Is there a location I can download them from? I have a fast ADSL link,
so 60+MB won't be a problem.

Hi David,

You'll have mail this evening ;-)

Cheers + HTH,

- Joerg


--
joerg dot hau at swissonline dot ch * Lausanne, Switzerland
http://homepage.sunrise.ch/mysunrise/joerg.hau/
"All standard disclaimers apply".
remove the obvious from my address to reply

 

[dave_f]

Joerg, David,
I too am interested in obtaining the manuals. Would one of you guys
please send me a copy and I would be happy to pay for postage/media
costs, (I can pay using paypal or send a cheque). I am in the UK.

I am a student and have bought the DMM second hand. I have a project
which involves contolling the DMM via LabVIEW using a GPIB card in a
PC.

Perhaps you have similar interests and would like to compare work?

I am looking for a driver that I can use with LabVIEW. Any ideas?

I can only find a driver for the '7151' on the Nation Instruments
site. Do you know if this will work?

Regards,
Dave F

 

[Joerg Hau]

Hi Dave,

I too am interested in obtaining the manuals. Would one of you guys
please send me a copy and I would be happy to pay for postage/media
costs, (I can pay using paypal or send a cheque). I am in the UK.

Please contact me via PM - I cannot decipher your e-mail address ;-)

I am a student and have bought the DMM second hand. I have a project
which involves contolling the DMM via LabVIEW using a GPIB card in a
PC.

Perhaps you have similar interests and would like to compare work?

I am looking for a driver that I can use with LabVIEW. Any ideas?

I can't help you there since I do not use LabView ... I control my 7150
using an old but Linux-based PC (equipped with an even older HP82335 card,
but it works like a charm ;-)

Programming GPIB under Linux is straightforward; a piece of software that
allows you to control the 7150 and get pseudo-real-time plots via gnuplot
is on my website.

Cheers + HTH,

- Joerg


--
joerg dot hau at swissonline dot ch * Lausanne, Switzerland
http://homepage.sunrise.ch/mysunrise/joerg.hau/
"All standard disclaimers apply".
remove the obvious from my address to reply

 

[dave_f]

["Please contact me via PM - I cannot decipher your e-mail address"]

OK I will do. But here is my email also: cd.franks@ntlworld.com

["Programming GPIB under Linux is straightforward; a piece of software
that allows you to control the 7150 and get pseudo-real-time plots via
gnuplot is on my website"]

I have checked your website and it looks good. Perhaps I will try this
also when I have got used to programming.

Many thanks.

 

hello,

We have seen u r post on google groups. We are urgently in need of the
user and service manuals for 7150Plus DMM. Can u please make it
available for us too. We are from India and dont worry about the size
of the file.