[Slightly OT?] Relay Pin Outs (Wiring Diagram) - Interpretat

[News Reader]

Hi,


Sorry for a slightly OT post.

These groups tend or seem to be fairly well frequented and at least slightly
relevant and equally likely to be able to fairly quickly yield a helpful and
useful answer.

In short:

Please advise on below relay pin diagram (for a STSP - Single Throw Single
Pole) relay (DIN style - i.e. pins in a row):


Pin 1 Pin 2 Pin 3 Pin 4

@ /|\ /|\ /|\
@ | | |
--------- |
|
/|\ |
| |
-----------


Note: " @@ " is a wiggle symbol which must be for the coil (?).


Your assistance, input and / or guidance, thoughts, etc. are much
appreciated and welcomed.

Thanks in advance.


Best wishes,



News Reader

 

[Dave Plowman (News)]

In article <hfnsjb$oh7$1@adenine.netfront.net>,
News Reader <no@email.invalid> wrote:

Hi,

Sorry for a slightly OT post.

These groups tend or seem to be fairly well frequented and at least
slightly relevant and equally likely to be able to fairly quickly yield
a helpful and useful answer.

In short:

Please advise on below relay pin diagram (for a STSP - Single Throw
Single Pole) relay (DIN style - i.e. pins in a row):

Pin 1 Pin 2 Pin 3 Pin 4

@ /|\ /|\ /|\
@ | | |
--------- |
|
/|\ |
| |
-----------

Note: " @@ " is a wiggle symbol which must be for the coil (?).

Your assistance, input and / or guidance, thoughts, etc. are much
appreciated and welcomed.

First you need to use a fixed font for ASCII art to work on other's
newsreaders.

There are millions of relays - all with different pin numbers.

Use a DVM set to resistance to find out which two are the coil - it will
have a resistance likely in the 100s of ohms. The other two are the switch
contacts. If you don't have a DVM Xmas approaches. ;-) If a low volt coil
you could use a suitable battery. Note some relays have an internal diode
across the coil so will be polarity sensitive.

--
*Why is the man who invests all your money called a broker?

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.

 

[News Reader]

"Russell Hafter News" <see.sig@walkingingermany.invalid> wrote in message
news:50c6ed7f57see.sig@walkingingermany.invalid...

In article <50c6e6c724dave@davenoise.co.uk>, Dave Plowman
(News) <dave@davenoise.co.uk> wrote:

First you need to use a fixed font for ASCII art to work
on other's newsreaders.

I assumed that all newsreaders offered a choice of font - or
is that just Pluto?

--
Russell
http://www.russell-hafter-holidays.co.uk
Russell Hafter Holidays E-mail to enquiries at our domain
Need a hotel? <http://www.hrs.com/?client=en__blue&customerId=416873103

Hi,


Many thanks all.

Will try following the advice given.

Any further / additional, etc. welcomed.

Rendering in a text only (non-html or "Font" rendering) mode should ensure
the ASCII art renders correctly ( ? - lol... or close enough?)...

Thanks again.

Bye for now.


Best wishes,



News Reader

 

[Russell Hafter News]

In article <50c6e6c724dave@davenoise.co.uk>, Dave Plowman
(News) <dave@davenoise.co.uk> wrote:

First you need to use a fixed font for ASCII art to work
on other's newsreaders.

I assumed that all newsreaders offered a choice of font - or
is that just Pluto?

--
Russell
http://www.russell-hafter-holidays.co.uk
Russell Hafter Holidays E-mail to enquiries at our domain
Need a hotel? <http://www.hrs.com/?client=en__blue&customerId=416873103>

 

[nut]

News Reader wrote:

Rendering in a text only (non-html or "Font" rendering) mode should
ensure the ASCII art renders correctly ( ? - lol... or close
enough?)...

Only fixed width fonts will display correctly... Outlook Express by default
uses a proportional font.

 

[Dave Liquorice]

On Wed, 09 Dec 2009 11:52:55 +0000 (GMT), Russell Hafter News wrote:

First you need to use a fixed font for ASCII art to work
on other's newsreaders.

I assumed that all newsreaders offered a choice of font - or
is that just Pluto?

Most GUI readers do, but even then there is no gurantee that the
vertical alignment will be corect.

Mr Plowman ommitted the word "pitch" between fixed and font. It is
the width of each character that needs to be the same for the entire
font, so a W is just as wide as an i. It doesn't matter what it looks
like, only that the charcters are all the same width.

--
Cheers
Dave.

 

[Dave Plowman (News)]

In article <hfo4et$14ga$1@adenine.netfront.net>,
News Reader <no@email.invalid> wrote:

Will try following the advice given.

Any further / additional, etc. welcomed.

If you know the make and part number you could try the maker's website for
a spec sheet. Although I've a feeling this might just confuse you more...

Rendering in a text only (non-html or "Font" rendering) mode should
ensure the ASCII art renders correctly ( ? - lol... or close enough?)...

Newsgroups are basic text only. What font you use to type the message
doesn't come through them. Only the spacing. So you need to use a fixed
space font, and others must use a fixed space font to view that diagram as
you see it.

--
*Never slap a man who's chewing tobacco *

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.

 

[Dave Plowman (News)]

In article <hfo6pt$s54$1@news.eternal-september.org>,
nut <nut@noreply.invalid> wrote:

Only fixed width fonts will display correctly... Outlook Express by
default uses a proportional font.

Since I don't use Windows, what is the name of the non proportional font
OE can access?

--
*Some people are alive only because it's illegal to kill them *

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.

 

[Brian Gaff]

What picture?
Brian

--
Brian Gaff....Note, this account does not accept Bcc: email.
graphics are great, but the blind can't hear them
Email: briang1@blueyonder.co.uk
______________________________________________________________________________________________________________


"News Reader" <no@email.invalid> wrote in message
news:hfnsjb$oh7$1@adenine.netfront.net...

Hi,


Sorry for a slightly OT post.

These groups tend or seem to be fairly well frequented and at least
slightly relevant and equally likely to be able to fairly quickly yield a
helpful and useful answer.

In short:

Please advise on below relay pin diagram (for a STSP - Single Throw Single
Pole) relay (DIN style - i.e. pins in a row):


Pin 1 Pin 2 Pin 3 Pin 4

@ /|\ /|\ /|\
@ | | |
--------- |
|
/|\ |
| |
-----------


Note: " @@ " is a wiggle symbol which must be for the coil (?).


Your assistance, input and / or guidance, thoughts, etc. are much
appreciated and welcomed.

Thanks in advance.


Best wishes,



News Reader

 

[Brian Gaff]

That is the point, a choice of font. Who is going to alter what they use,
and most default to truetype normal stuff.

Not a lot of good to me in any case but used to have fun with ascii art in
them old days.

Who remembers the sheep?
Brian

--
Brian Gaff....Note, this account does not accept Bcc: email.
graphics are great, but the blind can't hear them
Email: briang1@blueyonder.co.uk
______________________________________________________________________________________________________________


"Russell Hafter News" <see.sig@walkingingermany.invalid> wrote in message
news:50c6ed7f57see.sig@walkingingermany.invalid...

In article <50c6e6c724dave@davenoise.co.uk>, Dave Plowman
(News) <dave@davenoise.co.uk> wrote:

First you need to use a fixed font for ASCII art to work
on other's newsreaders.

I assumed that all newsreaders offered a choice of font - or
is that just Pluto?

--
Russell
http://www.russell-hafter-holidays.co.uk
Russell Hafter Holidays E-mail to enquiries at our domain
Need a hotel? <http://www.hrs.com/?client=en__blue&customerId=416873103

 

[Peter Duncanson]

On Wed, 09 Dec 2009 13:31:36 +0000 (GMT), "Dave Plowman (News)"
<dave@davenoise.co.uk> wrote:

In article <hfo6pt$s54$1@news.eternal-september.org>,
nut <nut@noreply.invalid> wrote:
Only fixed width fonts will display correctly... Outlook Express by
default uses a proportional font.

Since I don't use Windows, what is the name of the non proportional font
OE can access?

There is more than one. Possibly the most common one is "Courier New".

--
Peter Duncanson
(in uk.tech.digital-tv)

 

[Robin]

"News Reader" <no@email.invalid> wrote in message
news:hfnsjb$oh7$1@adenine.netfront.net...

Hi,


Sorry for a slightly OT post.

These groups tend or seem to be fairly well frequented and at least
slightly relevant and equally likely to be able to fairly quickly yield a
helpful and useful answer.

In short:

Please advise on below relay pin diagram (for a STSP - Single Throw Single
Pole) relay (DIN style - i.e. pins in a row):


Pin 1 Pin 2 Pin 3 Pin 4

@ /|\ /|\ /|\
@ | | |
--------- |
|
/|\ |
| |
-----------


Note: " @@ " is a wiggle symbol which must be for the coil (?).

SPST will be pin 1 to pin 2 will be the coil.
Pin 3 to pin 4 will be a normally open contact

 

[Dave Plowman (News)]

In article <k9svh5pa54phsc1cotsg2sgp797nigm56a@4ax.com>,
Peter Duncanson <mail@peterduncanson.net> wrote:

Since I don't use Windows, what is the name of the non proportional font
OE can access?

There is more than one. Possibly the most common one is "Courier New".

Thanks for that.

--
*If at first you don't succeed, try management *

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.

 

[Yeti]

On Dec 9, 10:02 am, "News Reader" <n...@email.invalid> wrote:

Hi,

Sorry for a slightly OT post.

These groups tend or seem to be fairly well frequented and at least slightly
relevant and equally likely to be able to fairly quickly yield a helpful and
useful answer.

In short:

Please advise on below relay pin diagram (for a STSP - Single Throw Single
Pole) relay (DIN style - i.e. pins in a row):

Pin 1    Pin 2    Pin 3    Pin 4

@        /|\        /|\          /|\
@         |          |            |
            ---------           |
                                     |
                      /|\            |
                       |             |
                      -----------

Note: " @@ " is a wiggle symbol which must be for the coil (?).

Your assistance, input and / or guidance, thoughts, etc. are much
appreciated and welcomed.

Thanks in advance.

Best wishes,

News Reader

Why not just take a picture (or draw one in Paint or something),
upload it to photobucket and post the link? much easier - and everyone
will see it correctly.

 

[Paul Starship]

On Wed, 9 Dec 2009 10:02:10 -0000, "News Reader" <no@email.invalid>
wrote:

Please advise on below relay pin diagram (for a STSP - Single Throw Single
Pole) relay (DIN style - i.e. pins in a row):

whats the part number of the relay ?

 

[Paul]

Hi,


Sorry for a slightly OT post.

These groups tend or seem to be fairly well frequented and at least
slightly relevant and equally likely to be able to fairly quickly yield a
helpful and useful answer.

In short:

Please advise on below relay pin diagram (for a STSP - Single Throw Single
Pole) relay (DIN style - i.e. pins in a row):


Pin 1 Pin 2 Pin 3 Pin 4

@ /|\ /|\ /|\
@ | | |
--------- |
|
/|\ |
| |
-----------


Note: " @@ " is a wiggle symbol which must be for the coil (?).

Lots of tech information here, should help.. http://uk.farnell.com/relays

Cheers,

Paul

 

[nut]

Dave Plowman (News) wrote:

In article <hfo6pt$s54$1@news.eternal-september.org>,
nut <nut@noreply.invalid> wrote:
Only fixed width fonts will display correctly... Outlook Express by
default uses a proportional font.

Since I don't use Windows, what is the name of the non proportional
font OE can access?

All of them, of course!

 

[JeffM]

Dave Plowman
[...]use a fixed font for ASCII art[...]

News Reader wrote:
Rendering in a text only (non-html or "Font" rendering) mode
should ensure the ASCII art renders correctly

Wanna bet?

http://groups.google.com/group/alt.electronics/msg/d0c7f851a409cfe8?dmode=source
Just do ASCII art in Notepad and paste *that* into your post.

....and as has been alluded to,
Outbreaks In Excess is the WORST choice for posting to Usenet
--for this and other reasons.
(Apparently you either format blockquoting by hand or
have done the 3rd-party update to make M$'s junk suck a bit less.)

 

[Andrew]

On Wed, 9 Dec 2009 15:24:43 -0800 (PST), JeffM <jeffm_@email.com>
wrote:

...and as has been alluded to,
Outbreaks In Excess is the WORST choice for posting to Usenet
--for this and other reasons.

I changed my opinion of this after seeing Bills contributions using
News Rover and trying it for myself. OE looks positively useful in
comparison.
--
Andrew, contact via http://interpleb.googlepages.com
Help make Usenet a better place: English is read downwards,
please don't top post. Trim replies to quote only relevant text.
Check groups.google.com before asking an obvious question.

 

[Jasen Betts]

On 2009-12-09, Dave Plowman (News) <dave@davenoise.co.uk> wrote:

In article <hfo6pt$s54$1@news.eternal-september.org>,
nut <nut@noreply.invalid> wrote:
Only fixed width fonts will display correctly... Outlook Express by
default uses a proportional font.

Since I don't use Windows, what is the name of the non proportional font
OE can access?

courier
terminal
fixedsys

(courier's probably best - looks like oldschool typewriter)