skill sheet connector warning

[Heinz Bruederlin]

While creating some schematic sheet containing a offpage connector via skill
I get the following warning:

"Warning: Sheet connector used in non-sheet schematic."

Does anybody know what this mean ?

Thanks Heinz

 

[Andrew Beckett]

I'd assume you are using an offpage connector in a schematic that is not a
multi-sheet schematic? i.e. what the warning message says...

off-sheet connectors only make sense in multi-sheet schematics.

Andrew.

On 19 Nov 2003 02:26:46 -0800, heinzbr@gmx.de (Heinz Bruederlin) wrote:

While creating some schematic sheet containing a offpage connector via skill
I get the following warning:

"Warning: Sheet connector used in non-sheet schematic."

Does anybody know what this mean ?

Thanks Heinz

--
Andrew Beckett
Senior Technical Leader
Custom IC Solutions
Cadence Design Systems Ltd

 

[Heinz Bruederlin]

Hi Andrew,
thanks for Your answer. This was the problem ...
Is there any list of "all" warning and error messages in the docs ?
Heinz.

I'd assume you are using an offpage connector in a schematic that is not a
multi-sheet schematic? i.e. what the warning message says...

off-sheet connectors only make sense in multi-sheet schematics.

Andrew.

On 19 Nov 2003 02:26:46 -0800, heinzbr@gmx.de (Heinz Bruederlin) wrote:

While creating some schematic sheet containing a offpage connector via skill
I get the following warning:

"Warning: Sheet connector used in non-sheet schematic."

Does anybody know what this mean ?

Thanks Heinz

 

[Andrew Beckett]

No. For such a complex set of tools it probably wouldn't be practical. I'd
sooner we spent the effort on making the errors and warnings self explanatory
rather than documenting them (although I'm not sure we're doing that either ;-<
)

Andrew.

On 23 Nov 2003 01:07:42 -0800, heinzbr@gmx.de (Heinz Bruederlin) wrote:

Hi Andrew,
thanks for Your answer. This was the problem ...
Is there any list of "all" warning and error messages in the docs ?
Heinz.

I'd assume you are using an offpage connector in a schematic that is not a
multi-sheet schematic? i.e. what the warning message says...

off-sheet connectors only make sense in multi-sheet schematics.

Andrew.

On 19 Nov 2003 02:26:46 -0800, heinzbr@gmx.de (Heinz Bruederlin) wrote:

While creating some schematic sheet containing a offpage connector via skill
I get the following warning:

"Warning: Sheet connector used in non-sheet schematic."

Does anybody know what this mean ?

Thanks Heinz

--
Andrew Beckett
Senior Technical Leader
Custom IC Solutions
Cadence Design Systems Ltd