Simulation : Access internal signals

[Closter]

Hello,

I create a design with some component. In behavioral simulation I
want to access to internal bus signals of my component in order to
save their value into a file.
I work with modelsim and it allow to look at this signals. But I
don't know how to save this signals into file.

Does solutions exists to access internal signals without
simulating each component of my design separately ?

Thanks.

 

[Jonathan Bromley]

On 3 May 2007 07:21:26 -0700, Closter <yannick.abela@gmail.com> wrote:

Hello,

I create a design with some component. In behavioral simulation I
want to access to internal bus signals of my component in order to
save their value into a file.
I work with modelsim

Lots of possibilities:

(1)
Look out ModelSim's documentation for the "SignalSpy" feature.
It's part of the simulator command language - it is not built in
to VHDL - but it works well and is fairly easy to use.

(2)
Alternatively, use the [log] command to trace all the signals
of interest to the waveform log file (*.wlf) and then look into
the "WLF API" which allows you to read data from the waveform
file using C-language programs.

(3)
Finally, consider using Tcl scripting to grab signal values
using the [examine] command, and then write them to a file
using plain Tcl. You can do this either by stopping the
simulator at interesting times, or by (again) logging to the
waveform file and then using the -time option of the [examine]
command to look backwards in time into the waveform file.

I've used (1) and (3) successfully, but have no personal
experience of (2).

Good luck.
--
Jonathan Bromley, Consultant

DOULOS - Developing Design Know-how
VHDL * Verilog * SystemC * e * Perl * Tcl/Tk * Project Services

Doulos Ltd., 22 Market Place, Ringwood, BH24 1AW, UK
jonathan.bromley@MYCOMPANY.com
http://www.MYCOMPANY.com

The contents of this message may contain personal views which
are not the views of Doulos Ltd., unless specifically stated.

 

[Closter]

On 3 mai, 17:57, Jonathan Bromley <jonathan.brom...@MYCOMPANY.com>
wrote:

On 3 May 2007 07:21:26 -0700, Closter <yannick.ab...@gmail.com> wrote:

Hello,

I create a design with some component. In behavioral simulation I
want to access to internal bus signals of my component in order to
save their value into a file.
I work with modelsim

Lots of possibilities:

(1)
Look out ModelSim's documentation for the "SignalSpy" feature.
It's part of the simulator command language - it is not built in
to VHDL - but it works well and is fairly easy to use.

(2)
Alternatively, use the [log] command to trace all the signals
of interest to the waveform log file (*.wlf) and then look into
the "WLF API" which allows you to read data from the waveform
file using C-language programs.

(3)
Finally, consider using Tcl scripting to grab signal values
using the [examine] command, and then write them to a file
using plain Tcl. You can do this either by stopping the
simulator at interesting times, or by (again) logging to the
waveform file and then using the -time option of the [examine]
command to look backwards in time into the waveform file.

I've used (1) and (3) successfully, but have no personal
experience of (2).

Good luck.
--
Jonathan Bromley, Consultant

DOULOS - Developing Design Know-how
VHDL * Verilog * SystemC * e * Perl * Tcl/Tk * Project Services

Doulos Ltd., 22 Market Place, Ringwood, BH24 1AW, UK
jonathan.brom...@MYCOMPANY.comhttp://www.MYCOMPANY.com

The contents of this message may contain personal views which
are not the views of Doulos Ltd., unless specifically stated.

Ok,
Thanks for help

 

[rbelli]

On May 4, 10:05 am, Closter <yannick.ab...@gmail.com> wrote:

On 3 mai, 17:57, Jonathan Bromley <jonathan.brom...@MYCOMPANY.com
wrote:



On 3 May 2007 07:21:26 -0700, Closter <yannick.ab...@gmail.com> wrote:

Hello,

I create a design with some component. In behavioral simulation I
want to access to internal bus signals of my component in order to
save their value into a file.
I work with modelsim

Lots of possibilities:

(1)
Look out ModelSim's documentation for the "SignalSpy" feature.
It's part of the simulator command language - it is not built in
to VHDL - but it works well and is fairly easy to use.

(2)
Alternatively, use the [log] command to trace all the signals
of interest to the waveform log file (*.wlf) and then look into
the "WLF API" which allows you to read data from the waveform
file using C-language programs.

(3)
Finally, consider using Tcl scripting to grab signal values
using the [examine] command, and then write them to a file
using plain Tcl. You can do this either by stopping the
simulator at interesting times, or by (again) logging to the
waveform file and then using the -time option of the [examine]
command to look backwards in time into the waveform file.

I've used (1) and (3) successfully, but have no personal
experience of (2).

Good luck.
--
Jonathan Bromley, Consultant

DOULOS - Developing Design Know-how
VHDL * Verilog * SystemC * e * Perl * Tcl/Tk * Project Services

Doulos Ltd., 22 Market Place, Ringwood, BH24 1AW, UK
jonathan.brom...@MYCOMPANY.comhttp://www.MYCOMPANY.com

The contents of this message may contain personal views which
are not the views of Doulos Ltd., unless specifically stated.

Ok,
Thanks for help

I make a different approach to log internal data. I use the following
method:

I declare a generic called simulation, like:
GENERIC(

simulation : INTEGER := 0
);
in all the components in the hierarchy. In the test vhdl I instantiate
the top vhdl project file with simulation equals 1.

Internally in the places I want to log the data I use the following
construction:
---------------------------------------------------
gen_logdata1 : IF(simulation = 1) GENERATE

logdata1 : logdata
GENERIC MAP(
file_name => "saidaPort.dat",
n_bits => phi_inc_portadora'Length,
n_elements => 1,
gerar => simulation
)
PORT MAP(
clk => enable_port,
enable => enable_true,
input => phi_inc_portadora
);

END GENERATE;
-----------------------------------------------------

The code of the logdata is:

-----------------------------------------------------
Library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_signed.all;
use std.textio.all;
use ieee.std_logic_textio.all;

ENTITY logdata IS
GENERIC(
file_name : string;
n_bits : INTEGER := 12;
n_elements : INTEGER := 1;
gerar : INTEGER := 1
);
PORT(
clk : in std_logic;
enable : in std_logic := '1';
input : in std_logic_vector(n_bits * n_elements - 1 downto
0)
);
END logData;

ARCHITECTURE beh of logdata IS


BEGIN
gerar1 : IF (gerar = 1) GENERATE

PROCESS
FILE fid2 : TEXT;
VARIABLE line2 : LINE;
VARIABLE temp_v : std_logic_vector(((n_bits+3)/4)*4-1 downto 0);
BEGIN

file_open(fid2, file_name, WRITE_MODE);

WHILE TRUE LOOP
wait until rising_edge(clk) AND enable = '1';

FOR i in 1 TO n_elements LOOP
temp_v := (OTHERS => '0');
temp_v(n_bits-1 downto 0) := input( (i*n_bits - 1)
downto ((i-1) * n_bits) );
hwrite(line2, temp_v, RIGHT, n_bits/4+3);
END LOOP;
writeline(fid2, line2);
END LOOP;

END PROCESS;
END GENERATE;

END beh;

-----------------------------------------------

I use this code with the modelsim and I can compile it with the XILINX
ISE without any modifications.