sharp losing tune 27es50

W

wolfhedd

Guest
sharp we got in is drifting on the signal, only seems to be drifting in and
out of signal for first minute or two, then seems to stay locked ok.
checked by adding heat with heat gun to tuner, seemed to make it lock, then
added coolant, seemed to unlock, but could have been coincidence as i ran
out of coolant. is it the tuner? meaning pll lock circuit? thinking about
remving the tuner and looking inside. any quick suggestions? thanks in
advance, wolf
 
Probably poor connections in the tuner, may try opening the shields and
reflowing the grounds or just order a new tuner.
"wolfhedd" <thevideodr@earthlink.net> wrote in message
news:fj72c.23234$aT1.16837@newsread1.news.pas.earthlink.net...
sharp we got in is drifting on the signal, only seems to be drifting in
and
out of signal for first minute or two, then seems to stay locked ok.
checked by adding heat with heat gun to tuner, seemed to make it lock,
then
added coolant, seemed to unlock, but could have been coincidence as i ran
out of coolant. is it the tuner? meaning pll lock circuit? thinking
about
remving the tuner and looking inside. any quick suggestions? thanks in
advance, wolf
Click to expand...
 
yes, did that, to no avail, guess we will have to order the tuner, thanks.
wolf

"Art" <stubby@comcast.net> wrote in message
news:4JudnZA48L_AmtTdRVn-vw@comcast.com...
Probably poor connections in the tuner, may try opening the shields and
reflowing the grounds or just order a new tuner.
"wolfhedd" <thevideodr@earthlink.net> wrote in message
news:fj72c.23234$aT1.16837@newsread1.news.pas.earthlink.net...
sharp we got in is drifting on the signal, only seems to be drifting in
and
out of signal for first minute or two, then seems to stay locked ok.
checked by adding heat with heat gun to tuner, seemed to make it lock,
then
added coolant, seemed to unlock, but could have been coincidence as i
ran
out of coolant. is it the tuner? meaning pll lock circuit? thinking
about
remving the tuner and looking inside. any quick suggestions? thanks in
advance, wolf
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top