Sharp CD-BA250 mini-component ,NEED HELP!! PROTECT message

[Alverio]

my Sharp CD-BA250 is totally lock up with a "PROTECT " message on the
display.
I have tryed the reset procedure from the operation manual ,but it does not
clear.
Has anybody had this problem ? , what else can I do?
Peter , rogelio@icepr.com

 

[Mike]

take it to a repair shop.

its a bad output transistor set.




"Alverio" <caralver@coqui.net> wrote in message
news:I%wQb.5437$dF4.2666@fe02.usenetserver.com...

my Sharp CD-BA250 is totally lock up with a "PROTECT " message on the
display.
I have tryed the reset procedure from the operation manual ,but it does
not
clear.
Has anybody had this problem ? , what else can I do?
Peter , rogelio@icepr.com

 

[David]

If it does this with all the speakers disconnected, it means the audio
output stage is shorted and the unit needs repaired by a qualified
technician.

Any shorted speaker wire will also cause this, as well as blow the
outputs.
Playing the unit at loud volume also can blow the outputs.

David

"Alverio" <caralver@coqui.net> wrote in message news:<I%wQb.5437$dF4.2666@fe02.usenetserver.com>...

my Sharp CD-BA250 is totally lock up with a "PROTECT " message on the
display.
I have tryed the reset procedure from the operation manual ,but it does not
clear.
Has anybody had this problem ? , what else can I do?
Peter , rogelio@icepr.com