seeking laserwriter II part

  • Thread starter stickyfox@gmail.com
  • Start date
S

stickyfox@gmail.com

Guest
Hello all,

I am looking for the LED board for an Apple Laserwriter II.. it's
about 1" x 3" and has four LEDs with plastic "fins." I am hoping that
someone has one lying around they wouldn't mind tearing apart. I used
to see them regularly in the junk bins but not so often these days.

I can compensate you via PayPal or send you other weird electronics
junk if you wouldn't mind dropping one in the mail.
 
In article
<6b67baeb-6c9f-473f-9556-919fe31989e7@a6g2000vbp.googlegroups.com>,
"stickyfox@gmail.com" <stickyfox@gmail.com> wrote:

Hello all,

I am looking for the LED board for an Apple Laserwriter II.. it's
about 1" x 3" and has four LEDs with plastic "fins." I am hoping that
someone has one lying around they wouldn't mind tearing apart. I used
to see them regularly in the junk bins but not so often these days.

I can compensate you via PayPal or send you other weird electronics
junk if you wouldn't mind dropping one in the mail.
Click to expand...
You could probably hack one out of LEDs and plexiglas...

Isaac
 
On Thu, 1 Oct 2009 20:01:30 -0700 (PDT), "stickyfox@gmail.com"
<stickyfox@gmail.com> wrote:

I am looking for the LED board for an Apple Laserwriter II
Click to expand...
Apple LaserWriter II, IIf, IIg, NT, SC, or NTX? There some
differences.

.. it's
about 1" x 3" and has four LEDs with plastic "fins." I am hoping that
someone has one lying around they wouldn't mind tearing apart. I used
to see them regularly in the junk bins but not so often these days.
Click to expand...
I tossed all my old LaserWriter (and HP SX series LJII and LJIII)
parts long ago. Good riddance. However, I scrapped out some of these
and may have saved some small parts. They're probably thrown into a
cardboard box and buried somewhere. I'll dig but it will take a few
daze.

Also, try asking on:
<http://www.fixyourownprinter.com/forums>

--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
 
stickyfox@gmail.com wrote:
Hello all,

I am looking for the LED board for an Apple Laserwriter II.. it's
about 1" x 3" and has four LEDs with plastic "fins."
snip
Click to expand...

I've got a couple of LWIIs (complete); if you don't find one, I could
harvest it from one of them perhaps.

Michael
 
On Oct 2, 2:14 am, Jeff Liebermann <je...@cruzio.com> wrote:

Also, try asking on:
http://www.fixyourownprinter.com/forums

Will definitely try this and get back. If you or Michael find one
Click to expand...
lying around I'd really appreciate it.

Isaac: I'd do this ordinarily but in this case I'm not fixing a
printer, just looking for that part for an alternate application.

Actually what I'd probably do is just have LEDs hanging out the holes
left by the old part by their leads... but yeah. :)
 
On Oct 1, 8:01 pm, "sticky...@gmail.com" <sticky...@gmail.com> wrote:
Hello all,

I am looking for the LED board for an Apple Laserwriter II.. it's
about 1" x 3"  and has four LEDs with plastic "fins."
Click to expand...
When Apple was still supporting it, that was the "Status Panel" part,
order # 971-0005. I've never seen one go bad, and it isn't necessary
for operation (most of the variants can be interrogated over
the network for any status info).

Lots of laserprinter parts suppliers on the internet will recognize
the
old Apple part number, I suspect.

It was common practice for repair shops to cut one of those status
panels
out of a dead machine to use when repairing with the lid removed;
there
might be one in many a technician's back-room.
 
On Fri, 2 Oct 2009 11:14:26 -0700 (PDT), Fox <stickyfox@gmail.com>
wrote:

If you or Michael find one
lying around I'd really appreciate it.
Click to expand...
Nothing in the pile. Lots of HP LaserJet II/III parts, but nothing
Apple specific. Sorry.

--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
 
On Sat, 03 Oct 2009 00:12:11 -0700, Jeff Liebermann <jeffl@cruzio.com>
wrote:

On Fri, 2 Oct 2009 11:14:26 -0700 (PDT), Fox <stickyfox@gmail.com
wrote:

If you or Michael find one
lying around I'd really appreciate it.

Nothing in the pile. Lots of HP LaserJet II/III parts, but nothing
Apple specific. Sorry.
Click to expand...
I have some LWII parts, but since the OP is a gmail user, his post was
deleted (all gmail posters are deleted due to excessive spam...)

If someone (non-gmail) would post the original message as a quote,
I'll look to see if I can find it.
 
As Requested;

In article
<6b67baeb-6c9f-473f-9556-919fe31989e7@a6g2000vbp.googlegroups.com>,
"stickyfox@gmail.com" <stickyfox@gmail.com> wrote:

Hello all,

I am looking for the LED board for an Apple Laserwriter II.. it's
about 1" x 3" and has four LEDs with plastic "fins." I am hoping that
someone has one lying around they wouldn't mind tearing apart. I used
to see them regularly in the junk bins but not so often these days.

I can compensate you via PayPal or send you other weird electronics
junk if you wouldn't mind dropping one in the mail.

- Tim -


In article <v5mec5pocgfrgmgt9mmsguotl32atl54um@4ax.com>, peter2
@hipson.net says...
On Sat, 03 Oct 2009 00:12:11 -0700, Jeff Liebermann <jeffl@cruzio.com
wrote:

On Fri, 2 Oct 2009 11:14:26 -0700 (PDT), Fox <stickyfox@gmail.com
wrote:

If you or Michael find one
lying around I'd really appreciate it.

Nothing in the pile. Lots of HP LaserJet II/III parts, but nothing
Apple specific. Sorry.

I have some LWII parts, but since the OP is a gmail user, his post was
deleted (all gmail posters are deleted due to excessive spam...)

If someone (non-gmail) would post the original message as a quote,
I'll look to see if I can find it.
Click to expand...
--
Email - tempowl@nospam.nbnet.nb.ca (remove the nospam part)

And If I Forgot To Mention My Location, I'm In The Fredericton Area
 
On Sat, 3 Oct 2009 11:44:53 -0300, Tim <tim@tim.tim> wrote:

As Requested;

In article
6b67baeb-6c9f-473f-9556-919fe31989e7@a6g2000vbp.googlegroups.com>,
"stickyfox@gmail.com" <stickyfox@gmail.com> wrote:

Hello all,

I am looking for the LED board for an Apple Laserwriter II.. it's
about 1" x 3" and has four LEDs with plastic "fins." I am hoping that
someone has one lying around they wouldn't mind tearing apart. I used
to see them regularly in the junk bins but not so often these days.

I can compensate you via PayPal or send you other weird electronics
junk if you wouldn't mind dropping one in the mail.

- Tim -
Click to expand...
Thanks, but that's one part I don't see in the junk box.
 
In article
<6b67baeb-6c9f-473f-9556-919fe31989e7@a6g2000vbp.googlegroups.com>,
"stickyfox@gmail.com" <stickyfox@gmail.com> wrote:

Hello all,

I am looking for the LED board for an Apple Laserwriter II.. it's
about 1" x 3" and has four LEDs with plastic "fins." I am hoping that
someone has one lying around they wouldn't mind tearing apart. I used
to see them regularly in the junk bins but not so often these days.

I can compensate you via PayPal or send you other weird electronics
junk if you wouldn't mind dropping one in the mail.
Click to expand...
If you dont get one elsewhere drop me a line as I have a unit ready for
the tip

David
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top