seeed ?

On Tuesday, August 13, 2019 at 12:02:08 PM UTC-4, legg wrote:
Anyone checked out these guys?

https://www.seeed.cc/

I've not used them. I don't see a way to specify a stackup. They are pretty inexpensive. My board was about $4.40 at qty 100 with about $1 each marginal cost.

Two problems I have with PCB houses through my fab house. They want to clip the silk screen so it can't be viewed easily (not needed since I've already made sure there is no interference with the pads) and I have trouble with them giving me the stack up I've specified.

--

Rick C.

- Get 1,000 miles of free Supercharging
- Tesla referral code - https://ts.la/richard11209
 
legg wrote:
Anyone checked out these guys?

https://www.seeed.cc/

RL
Hi,

I did the USD 1.00 for 3 boards "deal" once (HASL) and got USD 11.50
handling fee charged on top, which was not mentioned in the
advertisement ;-(

If it looks to good to be true ...

Anyway, boards were good.

I normally get my boards (ENIG) from OSH Park.

Kind regards,

Bert Timmerman.
 

Welcome to EDABoard.com

Sponsor

Back
Top