Section about switching mode power supply just started

[Patrick Chung]

http://www.cirvirlab.com/index.php/switching-mode-power-supply.html

Read first article:

http://www.cirvirlab.com/index.php/switching-mode-power-supply/129-buck-or-step-down-converter-basics.html

 

[Tim Wescott]

On Sun, 22 Dec 2013 23:35:44 -0800, Patrick Chung wrote:

http://www.cirvirlab.com/index.php/switching-mode-power-supply.html

Read first article:

http://www.cirvirlab.com/index.php/switching-mode-power-supply/129-buck-
or-step-down-converter-basics.html

Hello! Multiple posting!

To summarize my comments is sci.electronics.design: learn electronics,
learn English, then try again.

Oh -- and learn USENET etiquette, while you're at it.

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com

 

[amdx]

On 12/23/2013 12:58 PM, Tim Wescott wrote:

On Sun, 22 Dec 2013 23:35:44 -0800, Patrick Chung wrote:

http://www.cirvirlab.com/index.php/switching-mode-power-supply.html

Read first article:

http://www.cirvirlab.com/index.php/switching-mode-power-supply/129-buck-
or-step-down-converter-basics.html

Hello! Multiple posting!

To summarize my comments is sci.electronics.design: learn electronics,
learn English, then try again.

Oh -- and learn USENET etiquette, while you're at it.

He doesn't listen, I ask him to make a change to allow you to pick
prefixes like pico, nano, micro for the the capacitors and set frequency
in hertz, kHz, MHz for this simulator. I got no response.
http://www.cirvirlab.com/simulation/series_r_c_circuit_impedance_calculator.php

Mikek