searching printer for Logic Analyzer HP 1652B

Guest
Hello,

i have a HP 1652B Logic-Analyzer. I am searching a printer for it. In
the Menue there are following printers selectable: Thinkjet, Quietjet,
Laserjet and Alternate.

I am searching a ink-printer.

Who knows a newer printer which is compatible and can be used which
this logic analyzer?

Best regards

Wolfgang
 
In article <33f83f1d.0407291103.6c0dced0@posting.google.com>,
Wolfgangweinmann@aol.com says...
Hello,

i have a HP 1652B Logic-Analyzer. I am searching a printer for it. In
the Menue there are following printers selectable: Thinkjet, Quietjet,
Laserjet and Alternate.

I am searching a ink-printer.

Who knows a newer printer which is compatible and can be used which
this logic analyzer?

Best regards

Wolfgang
Does it support HP-GL/2 plotters like the HP7470A via a GPIB port? If
so, you may be able to use the 7470.exe app from
http://www.speakeasy.net/~jmiles1/7470.zip to capture screenshots on a
PC and generate hardcopy on any desired printer.

If the 7470 emulator doesn't work, you might also try the evaluation
version of PrintCapture (www.printcapture.com). Their HP-GL/2 renderer
is somewhat more robust than mine.

-- jm

------------------------------------------------------
http://www.qsl.net/ke5fx
Note: My E-mail address has been altered to avoid spam
------------------------------------------------------
 
On Thu, 29 Jul 2004 18:50:13 -0700, John Miles <jmiles@pop.removethistomailme.net> wrote:

In article <33f83f1d.0407291103.6c0dced0@posting.google.com>,
Wolfgangweinmann@aol.com says...
Hello,

i have a HP 1652B Logic-Analyzer. I am searching a printer for it. In
the Menue there are following printers selectable: Thinkjet, Quietjet,
Laserjet and Alternate.

I am searching a ink-printer.

Who knows a newer printer which is compatible and can be used which
this logic analyzer?

Best regards
I'm pretty sure the older deskjet inkjets (e.g. 500) are laserjet compatible, but I;m not sure if
any of them have RS232
 
Thank you - this Printcapture Tool works fine

Best regards

Wolfgang Weinmann
 

Welcome to EDABoard.com

Sponsor

Back
Top