Schematic - for a thumbwheel

[jodleren]

Hi!

I have a schematic for something - including some thumbwheels, meaning
those BCD coders, with 2 buttons... so you can count from 0 to 9, and
have 4 outputs.... what is the symbol for that?

And - if anyone can tell - what is a thumbwheel in Danish or Estonian?

BR
Sonnich

 

[James Beck]

In article <1175276135.269243.270520@y66g2000hsf.googlegroups.com>,
sonnich@hot.ee says...

Hi!

I have a schematic for something - including some thumbwheels, meaning
those BCD coders, with 2 buttons... so you can count from 0 to 9, and
have 4 outputs.... what is the symbol for that?

And - if anyone can tell - what is a thumbwheel in Danish or Estonian?

BR
Sonnich


I have my BCD switches layed out as 4 switches with a single common and

1,2,4,8 as notations over the appropriate switch bat. All inside a
single symbol outline.
Hope you can visualize that.

Jim

 

[Peter Bennett]

On 30 Mar 2007 10:35:35 -0700, "jodleren" <sonnich@hot.ee> wrote:

Hi!

I have a schematic for something - including some thumbwheels, meaning
those BCD coders, with 2 buttons... so you can count from 0 to 9, and
have 4 outputs.... what is the symbol for that?

I'd just make a box with 5 pins named 1, 2, 4, 8, and C. If I was
feeling artistic, I might try to draw something that looked like the
face of the switch in the box.

And - if anyone can tell - what is a thumbwheel in Danish or Estonian?

BR
Sonnich

--
Peter Bennett, VE7CEI Vancouver BC, Canada
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca

 

[jodleren]

On Mar 30, 11:12 pm, Peter Bennett <pete...@somewhere.invalid> wrote:

On 30 Mar 2007 10:35:35 -0700, "jodleren" <sonn...@hot.ee> wrote:

Hi!

I have a schematic for something - including some thumbwheels, meaning
those BCD coders, with 2 buttons... so you can count from 0 to 9, and
have 4 outputs.... what is the symbol for that?

I'd just make a box with 5 pins named 1, 2, 4, 8, and C. If I was
feeling artistic, I might try to draw something that looked like the
face of the switch in the box.

So did I. But the electricians didn't get it.

BR
Sonnich

 

[Lostgallifreyan]

"jodleren" <sonnich@hot.ee> wrote in
news:1175345038.178023.306630@d57g2000hsg.googlegroups.com:

On Mar 30, 11:12 pm, Peter Bennett <pete...@somewhere.invalid> wrote:
On 30 Mar 2007 10:35:35 -0700, "jodleren" <sonn...@hot.ee> wrote:

Hi!

I have a schematic for something - including some thumbwheels, meaning
those BCD coders, with 2 buttons... so you can count from 0 to 9, and
have 4 outputs.... what is the symbol for that?

I'd just make a box with 5 pins named 1, 2, 4, 8, and C. If I was
feeling artistic, I might try to draw something that looked like the
face of the switch in the box.

So did I. But the electricians didn't get it.

I was feeling artistic... http://preview.tinyurl.com/2op8va

Any good?

 

[jodleren]

On Mar 31, 6:50 pm, Lostgallifreyan <no-...@nowhere.net> wrote:

"jodleren" <sonn...@hot.ee> wrote innews:1175345038.178023.306630@d57g2000hsg.googlegroups.com:

On Mar 30, 11:12 pm, Peter Bennett <pete...@somewhere.invalid> wrote:
On 30 Mar 2007 10:35:35 -0700, "jodleren" <sonn...@hot.ee> wrote:

Hi!

I have a schematic for something - including some thumbwheels, meaning
those BCD coders, with 2 buttons... so you can count from 0 to 9, and
have 4 outputs.... what is the symbol for that?

I'd just make a box with 5 pins named 1, 2, 4, 8, and C. If I was
feeling artistic, I might try to draw something that looked like the
face of the switch in the box.

So did I. But the electricians didn't get it.

I was feeling artistic... http://preview.tinyurl.com/2op8va

Any good?

Well, yeah... I get it, but does the electric, who has to put this
together?

I think I still go for the box.... with C, 1, 2, 4 and 8. They can be
"blocked".

BR
Sonnich

 

[Lostgallifreyan]

"jodleren" <sonnich@hot.ee> wrote in
news:1175363848.346704.190160@n76g2000hsh.googlegroups.com:

Well, yeah... I get it, but does the electric, who has to put this
together?

Why encourage them to be stupid? If they can't get it from the obvious
drawing of four switches in a box with a pair of plus/minus buttons on it
and a standard acronym for Hexadecimal or Binary Coded Decimal, I doubt
they could reliably comprehend the difference between an DPST and an DPDT
switch, and they should give up their job for someone who can.

Labelling the pins will be up to you, as the orientation will depend on the
most convenient fit in your diagram.

In the vague hope that someone will these symbols useful, I have them in
vector form, in PDF files, so they can be scaled and printed accurately.

http://preview.tinyurl.com/2l34mg (HEX Switch Symbol)
http://preview.tinyurl.com/3ckrjj (BCD Switch Symbol)