saving schematic revisions in eagle?

[jim]

Is there anyway to (semi)automatically save revisions of schematics (and
boards) in eagle?

thanks

- jim

----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

 

[Joerg]

Hello Jim,

Is there anyway to (semi)automatically save revisions of schematics (and
boards) in eagle?

Not really, AFAICT. But I find it risky to let a CAD system decide on
when to bump the rev level. In SW engineering I have seen some rather
nasty consequences. I always do that by hand in the schematic and also
the file name. During design (important for the design history file) it
goes X1, X1 and so on, then on release it switches to A. Changing the
file name ensures that the previous rev level remains 'frozen'.

In my case it looks like this:
ZV036x2.sch

where ZV is the client code, 036 is the file number which must match the
document file number and x2 is the rev level.

Regards, Joerg

http://www.analogconsultants.com