Saving a PSpice Circuit as a Library Part

B

Bob Penoyer

Guest
How can Capture or Model Editor be used to convert a PSpice schematic
into a library part? I'm using Ver. 9.2.

I have a small circuit with input and output ports that I want to put
into a library so that I can easily use it in other designs.
 
On Wed, 21 Jun 2006 21:31:36 -0700, Bob Penoyer
<bob@NOSPAMbobpenoyer.com> wrote:

How can Capture or Model Editor be used to convert a PSpice schematic
into a library part? I'm using Ver. 9.2.

I have a small circuit with input and output ports that I want to put
into a library so that I can easily use it in other designs.
Click to expand...
Two ways:

(1) "MAKE" Subcircuit

(2) Just place a hierarchical block in your other design, then set the
"VIEW" path to your "part".

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice:(480)460-2350 | |
| E-mail Address at Website Fax:(480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
 
On Thu, 22 Jun 2006 07:32:09 -0700, Jim Thompson
<To-Email-Use-The-Envelope-Icon@My-Web-Site.com> wrote:

On Wed, 21 Jun 2006 21:31:36 -0700, Bob Penoyer
bob@NOSPAMbobpenoyer.com> wrote:

How can Capture or Model Editor be used to convert a PSpice schematic
into a library part? I'm using Ver. 9.2.

I have a small circuit with input and output ports that I want to put
into a library so that I can easily use it in other designs.

Two ways:

(1) "MAKE" Subcircuit

(2) Just place a hierarchical block in your other design, then set the
"VIEW" path to your "part".
Click to expand...
Thanks, Jim.
 
On Thu, 22 Jun 2006 20:37:47 -0700, Bob Penoyer
<bob@NOSPAMbobpenoyer.com> wrote:

On Thu, 22 Jun 2006 07:32:09 -0700, Jim Thompson
To-Email-Use-The-Envelope-Icon@My-Web-Site.com> wrote:

On Wed, 21 Jun 2006 21:31:36 -0700, Bob Penoyer
bob@NOSPAMbobpenoyer.com> wrote:

How can Capture or Model Editor be used to convert a PSpice schematic
into a library part? I'm using Ver. 9.2.

I have a small circuit with input and output ports that I want to put
into a library so that I can easily use it in other designs.

Two ways:

(1) "MAKE" Subcircuit

(2) Just place a hierarchical block in your other design, then set the
"VIEW" path to your "part".

Thanks, Jim.
Click to expand...
Check out my website for the various tricks I do with subcircuits and
importing netlists.

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice:(480)460-2350 | |
| E-mail Address at Website Fax:(480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top