Sansui TVM 1915 vertical question

[Gurkle]

Hi. I have a Sansui TVM1915 that has a picture that at random.
shrinks down to about 2 or 3 inches tall. Have replaced the vert out
ic la78040, and have tried flexing the board too with no luck. I have
also resoldered many connections around the vert circuit, also with
no change. The pic looks fine and then all of a sudden shrink for a
brief second and then back to normal. Any suggestions highly
appreciated.

 

[Sofie]

Gurckle:
Did you replace any of the half dozen or so electrolytics in the vertical
deflection output circuitry near and around the LA7840 chip? ?
--
Best Regards,
Daniel Sofie
Electronics Supply & Repair
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


"Gurkle" <me@myhouse.com> wrote in message
news:3ff9b0c1.686664@news.west.earthlink.net...

Hi. I have a Sansui TVM1915 that has a picture that at random.
shrinks down to about 2 or 3 inches tall. Have replaced the vert out
ic la78040, and have tried flexing the board too with no luck. I have
also resoldered many connections around the vert circuit, also with
no change. The pic looks fine and then all of a sudden shrink for a
brief second and then back to normal. Any suggestions highly
appreciated.