Samsung monitor CSA7571

[no_one]

I need some help identifying some burnt resistors in the power supply for a
Samsung monitor, model CSA7571.

They are:

R619
R620
R623
R624
R626
R627
R632

And a few other parts:

CR603
D610
Q602
ZD602
PC602

Maybe someone could post the schematic.

Yes, it sparked and smoked and everything.

Thanks for your help.

 

[Darko Stajic]

Write all numbers and char... from the back cover.
Maybe I can find schematic.

Regards

--


Darko Stajic
-----------------------------------------------
reply to: stdarko@neobee.net
-----------------------------------------------

I need some help identifying some burnt resistors in the power supply for
a
Samsung monitor, model CSA7571.

 

[Darko Stajic]

Write all numbers and char... from the back cover.
Maybe I can find schematic.

Regards


--


Darko Stajic
-----------------------------------------------
reply to: stdarko@neobee.net
-----------------------------------------------

I need some help identifying some burnt resistors in the power supply for
a
Samsung monitor, model CSA7571.

 

[no_one]

Thanks for your help. This was a nice 17" monitor when it worked. Also
refered to as SyncMaster 4?


Model: CSA7571
Serial: 11100214, November, 1991
FCC ID: A3LCSA757

Power Supply PCB: 3007-600-030M, Rev. 05

Monitor PCB: KC-15

The power supply has two connections to the monitor. The 5 wire is OK, the
voltages are printed on the PCB. The 3 wire is dead. Black is ground, orange
is some signal (standby?) and the red wire is hot, but no voltage shown. I
could provide power to this connection to test the monitor if I knew the
correct voltage. Any suggestions?

"Darko Stajic" <stdarko@neobeeNET.net> wrote in message
news:brdeof$o6r$1@shiva.neobee.net...

Write all numbers and char... from the back cover.
Maybe I can find schematic.

Regards


--


Darko Stajic
-----------------------------------------------
reply to: stdarko@neobee.net
-----------------------------------------------

I need some help identifying some burnt resistors in the power supply
for
a
Samsung monitor, model CSA7571.