S7150 DMM flashing "ERR" & "CAL" symbols

[Matt Nottingham]

Hi,

I have a S7150 DMM which I'm controlling by GPIB from Linux.

Before I had a list of commands, I was trying various combinations
to see what would happen. I've somehow managed to get it in a state
that the ERR & CAL symbols constantly flash on & off. I've tried
power cycling it, sending it "A" & "C0" commands and everything
else in the manual, but with no luck.

Any suggestions?

(Yeah, I know its my own fault.....)

Thanks,

Matt Nottingham

 

[Matt Nottingham]

On Sun, 30 Jan 2005 11:05:32 +0000, Matt Nottingham wrote:

Hi,

I have a S7150 DMM which I'm controlling by GPIB from Linux.

Before I had a list of commands, I was trying various combinations
to see what would happen. I've somehow managed to get it in a state
that the ERR & CAL symbols constantly flash on & off. I've tried
power cycling it, sending it "A" & "C0" commands and everything
else in the manual, but with no luck.

Any suggestions?

(Yeah, I know its my own fault.....)

Thanks,

Matt Nottingham

I forgot to mention that apart from the flashing symbols, the
device seems to work quite happily.

Matt