E
ED ROGERS
Guest
How do you wire S video to component video outputs?Does the audio ride
these same paths?
these same paths?
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
C
Chris
Guest
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
ED ROGERS wrote:
It's not just about "wiring" it properly. First off, to answer your
second question, audio is not part of S-video or component video;
it's carried separately. Second, to answer your first question, if
I'm not mistaken, this is what modern TVs used "comb filters" for,
which, I'm pretty sure, are very complicated devices. There are
probably converters out there, but it'd be a big undertaking to build
one yourself.
Chris
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)
iD8DBQFBsrMfgxSrXuMbw1YRAnCuAJ451kVvLW7Ylz8Kaq1MsZzNpgYM/wCfZPTo
A/QvF2DVtzWjflcOEYTFsP8=
=JdLl
-----END PGP SIGNATURE-----
Hash: SHA1
ED ROGERS wrote:
Hi,How do you wire S video to component video outputs?Does the audio
ride these same paths?
It's not just about "wiring" it properly. First off, to answer your
second question, audio is not part of S-video or component video;
it's carried separately. Second, to answer your first question, if
I'm not mistaken, this is what modern TVs used "comb filters" for,
which, I'm pretty sure, are very complicated devices. There are
probably converters out there, but it'd be a big undertaking to build
one yourself.
Chris
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)
iD8DBQFBsrMfgxSrXuMbw1YRAnCuAJ451kVvLW7Ylz8Kaq1MsZzNpgYM/wCfZPTo
A/QvF2DVtzWjflcOEYTFsP8=
=JdLl
-----END PGP SIGNATURE-----
B
boznic
Guest
ED ROGERS Wrote:
What is the purpose for your wanting to do this. Im only askin
because there would really be no advantage in the outcome of th
picture. Unless you were using an upconverter, and manipulating th
signal. In which case you have quite a project.
Just curious about what you are trying to hookup.
Good luck
--
boznic
How do you wire S video to component video outputs?Does the audio ride
these same paths?
What is the purpose for your wanting to do this. Im only askin
because there would really be no advantage in the outcome of th
picture. Unless you were using an upconverter, and manipulating th
signal. In which case you have quite a project.
Just curious about what you are trying to hookup.
Good luck
--
boznic