Rubber keyboard contact repair

  • Thread starter Gareth Magennis
  • Start date
G

Gareth Magennis

Guest
Hi,

anyone geting good results rejuvenating worn keyboard contacts? I'm
talking the large ones you find on music keyboards, drum machines etc.
Particularly ones where you can't buy the contact rubbers any more ;)

I once bought some liquid paint on stuff specifically designed to do this,
it was VERY expensive and didn't work.

I am in the UK if that makes a difference.


Cheers,


Gareth.
 
Gareth Magennis <sound.service@btconnect.com> wrote in message
news:wJ-dnQh7OIbG35vRnZ2dnUVZ7tGdnZ2d@bt.com...
Hi,

anyone geting good results rejuvenating worn keyboard contacts? I'm
talking the large ones you find on music keyboards, drum machines etc.
Particularly ones where you can't buy the contact rubbers any more ;)

I once bought some liquid paint on stuff specifically designed to do this,
it was VERY expensive and didn't work.

I am in the UK if that makes a difference.


Cheers,


Gareth.
Click to expand...

Years ago you should have started collecting the contact sheets from
scrapped (due to redundency rather than worn out) zappers etc. Then a matter
of cut and paste and some copydex or similar to keep in place. Legends won;t
match but a small price to pay for continued functionality for someone who
is so familiar with the kit he does not need the legends anyway
 
On Wed, 02 Jun 2010 12:36:57 +0100, Gareth Magennis ǝʇoɹʍ:

Hi,

anyone geting good results rejuvenating worn keyboard contacts? I'm
talking the large ones you find on music keyboards, drum machines etc.
Particularly ones where you can't buy the contact rubbers any more ;)

I once bought some liquid paint on stuff specifically designed to do
this, it was VERY expensive and didn't work.

I am in the UK if that makes a difference.


Cheers,


Gareth.
Click to expand...
I find it makes more sense to buy a new keyboard these days.
 
"Meat Plow" <mhywatt@yahoo.com> wrote in message
news:pan.2010.06.02.12.24.08@gmail.com...
On Wed, 02 Jun 2010 12:36:57 +0100, Gareth Magennis ??o??:

Hi,

anyone geting good results rejuvenating worn keyboard contacts? I'm
talking the large ones you find on music keyboards, drum machines etc.
Particularly ones where you can't buy the contact rubbers any more ;)

I once bought some liquid paint on stuff specifically designed to do
this, it was VERY expensive and didn't work.

I am in the UK if that makes a difference.


Cheers,


Gareth.

I find it makes more sense to buy a new keyboard these days.
Click to expand...
I don't think the OP is talking about generic PC stuff.

The conductive rubber pads can be pared off any scrap keypad that has a
rubber button inlay, the best adhesive is RTV silicone rubber sealant, this
is sold in many guises - silicone basth sealant or "instant gasket" are a
couple of examples.

Definately DO NOT use copydex it smells evil and as an adhesive isn't worth
the space it takes up in the junkbox.
 
Gareth Magennis wrote:
Hi,

anyone geting good results rejuvenating worn keyboard contacts? I'm
talking the large ones you find on music keyboards, drum machines etc.
Particularly ones where you can't buy the contact rubbers any more ;)

I once bought some liquid paint on stuff specifically designed to do this,
it was VERY expensive and didn't work.

I am in the UK if that makes a difference.


Cheers,


Gareth.


Buy a cheap calculator or use a damaged keyboard to furnish
Click to expand...
conductive pieces for repair.
 
On Wed, 02 Jun 2010 17:12:15 +0100, ian field ǝʇoɹʍ:

"Meat Plow" <mhywatt@yahoo.com> wrote in message
news:pan.2010.06.02.12.24.08@gmail.com...
On Wed, 02 Jun 2010 12:36:57 +0100, Gareth Magennis ??o??:

Hi,

anyone geting good results rejuvenating worn keyboard contacts? I'm
talking the large ones you find on music keyboards, drum machines etc.
Particularly ones where you can't buy the contact rubbers any more ;)

I once bought some liquid paint on stuff specifically designed to do
this, it was VERY expensive and didn't work.

I am in the UK if that makes a difference.


Cheers,


Gareth.

I find it makes more sense to buy a new keyboard these days.

I don't think the OP is talking about generic PC stuff.

The conductive rubber pads can be pared off any scrap keypad that has a
rubber button inlay, the best adhesive is RTV silicone rubber sealant,
this is sold in many guises - silicone basth sealant or "instant gasket"
are a couple of examples.

Definately DO NOT use copydex it smells evil and as an adhesive isn't
worth the space it takes up in the junkbox.
Click to expand...
Damn I didn't read that very well one did I?
 
"Gareth Magennis" <sound.service@btconnect.com> wrote in message
news:wJ-dnQh7OIbG35vRnZ2dnUVZ7tGdnZ2d@bt.com...
Hi,

anyone geting good results rejuvenating worn keyboard contacts? I'm
talking the large ones you find on music keyboards, drum machines etc.
Particularly ones where you can't buy the contact rubbers any more ;)

I once bought some liquid paint on stuff specifically designed to do this,
it was VERY expensive and didn't work.

I am in the UK if that makes a difference.


Cheers,


Gareth.
Click to expand...


Thanks to all. This is a largeish pad on a Drum Machine. I had a quick go
at slicing off part of the knackered pad and slicing off the conductive
nipple from a keyboard contact strip with a view to gluing some of them on.

Rapidly came to the conclusion I could not charge a customer money for a
complete bodge job I could not guarantee to work past next week. This is
the Start/Stop button which takes a hammering.

One more piece of old toot bites the dust.
 
Gareth Magennis <sound.service@btconnect.com> wrote in message
news:NXTNn.82331$9J1.80992@hurricane...
"Gareth Magennis" <sound.service@btconnect.com> wrote in message
news:wJ-dnQh7OIbG35vRnZ2dnUVZ7tGdnZ2d@bt.com...
Hi,

anyone geting good results rejuvenating worn keyboard contacts? I'm
talking the large ones you find on music keyboards, drum machines etc.
Particularly ones where you can't buy the contact rubbers any more ;)

I once bought some liquid paint on stuff specifically designed to do
this,
it was VERY expensive and didn't work.

I am in the UK if that makes a difference.


Cheers,


Gareth.




Thanks to all. This is a largeish pad on a Drum Machine. I had a quick
go
at slicing off part of the knackered pad and slicing off the conductive
nipple from a keyboard contact strip with a view to gluing some of them
on.

Rapidly came to the conclusion I could not charge a customer money for a
complete bodge job I could not guarantee to work past next week. This is
the Start/Stop button which takes a hammering.

One more piece of old toot bites the dust.
Click to expand...

I would have tried woven glass matt reinforced, moulded hotmelt glue sheet ,
with copper or brass gauze patches melted into the rear. Don't know how long
the pcb tracks would survive. Making the reinforced flexible sheet in my
tips files.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://diverse.4mg.com/index.htm
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top