RS232 / MAX232

[sinner]

I would like to interface my pc with a pic16F877A, first to program
it using a bootloader, and later to send debugging info from the chip.

The problem is, there are several chips to choose from at both mouser and
digikey. The book I'm using only says MAX232, but there are MAX232N,
MAX232CPE, MAX232EEPE, etc... and the datasheets are sort of misleading.
One of them sounds like it converts TTL to RS232, not the other way
around, which is what I need. I just want the vanilla chip... that won't
blow up my serial port. Any help?

 

[loedown]

Have a look around Maxim website, the end letters stipulate which packages
are available. They are sold as standard through hole, SOIC (SMD), mil spec
and as die (silicon wafer).

Paul

 

[John Musselman]

Use the MAX202 series. It uses a higher frequency charge pump and you only
need 0.1 uF capacitors. Assuming you want DIP parts, get the MAX202CPE.
Analog devices makes an equivalent, the ADM202JN.

Good luck,

John Musselman

 

[sinner]

On Fri, 08 Apr 2005 21:47:26 +1000, loedown wrote:

Have a look around Maxim website, the end letters stipulate which packages
are available. They are sold as standard through hole, SOIC (SMD), mil spec
and as die (silicon wafer).

Paul

Yeah, I'm looking for standard, dip parts, nothing fancy.... so MAX232CPE
seems right... I'm ordering them now, crossing fingers, maybe exploding a
laptop.

 

[loedown]

Ask for samples, they will send you 2 and it won't cost you anything, they
are good like that

Paul