Ride on Mower electrics

  • Thread starter Michael Mackay-Blair
  • Start date
M

Michael Mackay-Blair

Guest
Here is a good one for you.... Does anyone have a Cct Dia for a Bolens 13HLT
fitted with a Briggs and Straton 3800333 engine.

My dog a puppy Bordercollie/keplie cross decided the wiring would be a good
food source. I have rewired the obvious ones but still have some others that
make no sense. I can get the mower started but the only way to turn it off
is to open the choke and shut the throttle. It appears that the isolation
cct for the spark plug is not in cct. Any hints ( apart from shooting the
dog).

I am thinking of changing the dogs name to sparky ( I said it before anyone
else did)

TIA Michael
 
Michael Mackay-Blair wrote:

I am thinking of changing the dogs name to sparky ( I said it before anyone
else did)
Click to expand...
We call ours Engineer....
Kick him in the nuts and you're never quite sure whether he'll make a
bolt for the door or a race for your balls. :)

--
John H

Hotmail is a spam trap, wbuauneirl@ovtcbaq.pbz will reach me if you apply ROT13.
 
This may help:
http://members.aol.com/pullingtractor/ignition.htm




--
Regards
Blue

Remove Z from email address to reply directly.
 
.....and this http://www.repairfaq.org/sam/lmfaq.htm

--
Regards
Blue

Remove Z from email address to reply directly.
 
And there are free illustrated B & S parts guides here that may
be useful:
http://shop.briggsandstratton.com/BShopProductListingPage.asp?rsvp=0&PARENTID=0&SessionID=0C868B97-B197-4480-864B-2DACC2DF47E1&MECID=100&CATALOGID=56B2B9A7-283C-11D4-8886-00B0D0203414

--
Regards
Blue

Remove Z from email address to reply directly.
 
oops for Australia here:
http://www.briggsandstratton.com/display/router.asp?DocID=67713

--
Regards
Blue

Remove Z from email address to reply directly.
 
and if all else fails someone on this forum may help:
http://www.ytmag.com/gardent/messages/27835.html


--
Regards
Blue

Remove Z from email address to reply directly.
 
or better
http://groups.yahoo.com/group/BolensTractorGroup/messages/1701?viscount=100

--
Regards
Blue

Remove Z from email address to reply directly.
 
aussieblu you ARE A LEGEND!!! well I thinks.....my dog dosnt however!

Michael
"aussieblu" <zaussiblu@bigpond.net.au> wrote in message
news:dR_kc.7887$TT.1616@news-server.bigpond.net.au...
or better

http://groups.yahoo.com/group/BolensTractorGroup/messages/1701?viscount=100

--
Regards
Blue

Remove Z from email address to reply directly.
Click to expand...
 
I have already dl'ed the BS parts list and service manual but it didnt show
what I wanted.

Thanks anyway
"aussieblu" <zaussiblu@bigpond.net.au> wrote in message
news:Et_kc.7863$TT.319@news-server.bigpond.net.au...
oops for Australia here:
http://www.briggsandstratton.com/display/router.asp?DocID=67713

--
Regards
Blue

Remove Z from email address to reply directly.
Click to expand...
 
Magneto job? If so, the kill switch is normally a shorting switch across a
tap on the coil creating a "shorted turn" to kill the engine.

Battery job? Conventional Kettering ignition uses a series ignition switch
to remove battery power from the coil/points.

"Michael Mackay-Blair" <bflmb@westnet.com.au> wrote in message
news:4094f8c9$1@quokka.wn.com.au...
I have already dl'ed the BS parts list and service manual but it didnt
show
what I wanted.

Thanks anyway
"aussieblu" <zaussiblu@bigpond.net.au> wrote in message
news:Et_kc.7863$TT.319@news-server.bigpond.net.au...
oops for Australia here:
http://www.briggsandstratton.com/display/router.asp?DocID=67713

--
Regards
Blue

Remove Z from email address to reply directly.
Click to expand...
 
And I think my dawg has prob eaten that part of the cct then....as in
battery
"J" <j@j.com> wrote in message news:40984230@news.rivernet.com.au...
Magneto job? If so, the kill switch is normally a shorting switch across a
tap on the coil creating a "shorted turn" to kill the engine.

Battery job? Conventional Kettering ignition uses a series ignition switch
to remove battery power from the coil/points.

"Michael Mackay-Blair" <bflmb@westnet.com.au> wrote in message
news:4094f8c9$1@quokka.wn.com.au...
I have already dl'ed the BS parts list and service manual but it didnt
show
what I wanted.

Thanks anyway
"aussieblu" <zaussiblu@bigpond.net.au> wrote in message
news:Et_kc.7863$TT.319@news-server.bigpond.net.au...
oops for Australia here:
http://www.briggsandstratton.com/display/router.asp?DocID=67713

--
Regards
Blue

Remove Z from email address to reply directly.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top