J
James Doyle
Guest
need a ribbon cable for display board, wave radio AWR1-1W ..
jim nc4fl@hotmail.com
jim nc4fl@hotmail.com
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
I
Ian Field
Guest
"James Doyle" <nc4fl@hotmail.com> wrote in message
news:9f89b65c-eefa-45bd-8737-336d38d24ee0@googlegroups.com...
Not everyone has seen the insides of one of those - you need to be a little
more specific.
There's wire ribbon cable of various types, and a few kinds of mylar
flexiprint - and many different methods of termination.
Your first port of call is to find out if its available as a service
replacement - but that could well cost as much as just replacing the radio.
Describe the part and someone might be able to suggest a fix.
news:9f89b65c-eefa-45bd-8737-336d38d24ee0@googlegroups.com...
need a ribbon cable for display board, wave radio AWR1-1W ..
jim nc4fl@hotmail.com
Not everyone has seen the insides of one of those - you need to be a little
more specific.
There's wire ribbon cable of various types, and a few kinds of mylar
flexiprint - and many different methods of termination.
Your first port of call is to find out if its available as a service
replacement - but that could well cost as much as just replacing the radio.
Describe the part and someone might be able to suggest a fix.
J
Jon Elson
Guest
James Doyle wrote:
You might poke around in their web site and see if you can find something
that is at least a close match.
Jon
Digi-Key has a whole area of board to board jumpers and specialty cables.need a ribbon cable for display board, wave radio AWR1-1W ..
jim nc4fl@hotmail.com
You might poke around in their web site and see if you can find something
that is at least a close match.
Jon
J
John Robertson
Guest
On 2017/05/02 5:27 AM, James Doyle wrote:
Depending on the type of ribbon cable and plugs, if a wire is broken
where it just comes out of the plug you can sometimes separate the
housing and carefully release and then move the wire inwards 3/8" or so
to get a fresh connection when re-pressed.
Assuming there is enough slack...
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
need a ribbon cable for display board, wave radio AWR1-1W ..
jim nc4fl@hotmail.com
Depending on the type of ribbon cable and plugs, if a wire is broken
where it just comes out of the plug you can sometimes separate the
housing and carefully release and then move the wire inwards 3/8" or so
to get a fresh connection when re-pressed.
Assuming there is enough slack...
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."