Retiring...

J

jurb...@gmail.com

Guest
Finally for good. Next month fslls on my 1st Bday, My health sucks and I can barely walk. I own amps I cannot lift. And my eyesight is shit.

Electronix Underground will be no more after August 18th 2010.

I doubt I will sell it all off. I might want to experiment. I think I got an Arduino around here somewhere.

I should sell a few things, like all these matched sets of output transistors. I am not anxious to sell the equipment. I got an HP 339a, Tek 465B, Wavetek old analog genrator, a cheapo scope for a diaaly driver, a FLuke 8850a and an 8000a, HP 5314a freq. counter, homemade isolation good to at least 1,000 watts ad dummy loads close. They\'ll handle the 1,000 but are only 9.1 ohms, not 8.

On the side, got a Tek 561A with delayed tie and dual trace, a 422 that will ont work on 12V, also a meter with nice big characters also wil only run on 12 volts. I got aa 12 volt backup thing fo a car, or newer batteries could be put in the scope and run them both.

Already for sale are Tek 7603 and TDS-360, both need work.

I\'ll still be around.
 
On Friday, July 23, 2021 at 12:23:29 PM UTC-4, jurb...@gmail.com wrote:
Finally for good. Next month fslls on my 1st Bday, My health sucks and I can barely walk. I own amps I cannot lift. And my eyesight is shit.

Electronix Underground will be no more after August 18th 2010.

I doubt I will sell it all off. I might want to experiment. I think I got an Arduino around here somewhere.

I should sell a few things, like all these matched sets of output transistors. I am not anxious to sell the equipment. I got an HP 339a, Tek 465B, Wavetek old analog genrator, a cheapo scope for a diaaly driver, a FLuke 8850a and an 8000a, HP 5314a freq. counter, homemade isolation good to at least 1,000 watts ad dummy loads close. They\'ll handle the 1,000 but are only 9..1 ohms, not 8.

On the side, got a Tek 561A with delayed tie and dual trace, a 422 that will ont work on 12V, also a meter with nice big characters also wil only run on 12 volts. I got aa 12 volt backup thing fo a car, or newer batteries could be put in the scope and run them both.

Already for sale are Tek 7603 and TDS-360, both need work.

I\'ll still be around.

Good luck Jeff. Hope your health improves.

Regarding the 7603, most problems are the big honking Mallory caps in the power supply. Over the past 30 years, mine has gone down 4 times, three to bad caps (last time two months ago) and one bad IC in the horiz plug in. Symptoms of those bad caps are no display or a badly distorted display.
 
On Friday, July 23, 2021 at 12:23:29 PM UTC-4, jurb...@gmail.com wrote:
Finally for good. Next month fslls on my 1st Bday, My health sucks and I can barely walk. I own amps I cannot lift. And my eyesight is shit.

Electronix Underground will be no more after August 18th 2010.

I doubt I will sell it all off. I might want to experiment. I think I got an Arduino around here somewhere.

I should sell a few things, like all these matched sets of output transistors. I am not anxious to sell the equipment. I got an HP 339a, Tek 465B, Wavetek old analog genrator, a cheapo scope for a diaaly driver, a FLuke 8850a and an 8000a, HP 5314a freq. counter, homemade isolation good to at least 1,000 watts ad dummy loads close. They\'ll handle the 1,000 but are only 9..1 ohms, not 8.

On the side, got a Tek 561A with delayed tie and dual trace, a 422 that will ont work on 12V, also a meter with nice big characters also wil only run on 12 volts. I got aa 12 volt backup thing fo a car, or newer batteries could be put in the scope and run them both.

Already for sale are Tek 7603 and TDS-360, both need work.

I\'ll still be around.

Good luck Jeff. Hope your health improves.

Regarding the 7603, most problems are the big honking Mallory caps in the power supply. Over the past 30 years, mine has gone down 4 times, three to bad caps (last time two months ago) and one bad IC in the horiz plug in. Symptoms of those bad caps are no display or a badly distorted display.
 
On 24/07/2021 2:23 am, jurb...@gmail.com wrote:
Finally for good. Next month fslls on my 1st Bday, My health sucks and I can barely walk. I own amps I cannot lift. And my eyesight is shit.

Electronix Underground will be no more after August 18th 2010.

I doubt I will sell it all off. I might want to experiment. I think I got an Arduino around here somewhere.

I should sell a few things, like all these matched sets of output transistors. I am not anxious to sell the equipment. I got an HP 339a, Tek 465B, Wavetek old analog genrator, a cheapo scope for a diaaly driver, a FLuke 8850a and an 8000a, HP 5314a freq. counter, homemade isolation good to at least 1,000 watts ad dummy loads close. They\'ll handle the 1,000 but are only 9.1 ohms, not 8.

On the side, got a Tek 561A with delayed tie and dual trace, a 422 that will ont work on 12V, also a meter with nice big characters also wil only run on 12 volts. I got aa 12 volt backup thing fo a car, or newer batteries could be put in the scope and run them both.

Already for sale are Tek 7603 and TDS-360, both need work.

I\'ll still be around.

**Damn. Good luck for the future. Pity you\'re not nearby (I\'m in
Australia), I\'d grab that 7603. Nice \'scope. I salvaged a 7A22 for use
in a 7000 series, when one falls in my lap.
 
On 24/07/2021 2:23 am, jurb...@gmail.com wrote:
Finally for good. Next month fslls on my 1st Bday, My health sucks and I can barely walk. I own amps I cannot lift. And my eyesight is shit.

Electronix Underground will be no more after August 18th 2010.

I doubt I will sell it all off. I might want to experiment. I think I got an Arduino around here somewhere.

I should sell a few things, like all these matched sets of output transistors. I am not anxious to sell the equipment. I got an HP 339a, Tek 465B, Wavetek old analog genrator, a cheapo scope for a diaaly driver, a FLuke 8850a and an 8000a, HP 5314a freq. counter, homemade isolation good to at least 1,000 watts ad dummy loads close. They\'ll handle the 1,000 but are only 9.1 ohms, not 8.

On the side, got a Tek 561A with delayed tie and dual trace, a 422 that will ont work on 12V, also a meter with nice big characters also wil only run on 12 volts. I got aa 12 volt backup thing fo a car, or newer batteries could be put in the scope and run them both.

Already for sale are Tek 7603 and TDS-360, both need work.

I\'ll still be around.

**Damn. Good luck for the future. Pity you\'re not nearby (I\'m in
Australia), I\'d grab that 7603. Nice \'scope. I salvaged a 7A22 for use
in a 7000 series, when one falls in my lap.
 

Welcome to EDABoard.com

Sponsor

Back
Top