Resistor Question

J

Jack00

Guest
Theres a resistor I used in the past but I don't know what its
called. It has a red body with no bands on it ie no lines and it
stays cool in high power applications. Does anyone know what it is
called? Thanks
 
"Jack00" <SPal508596@aol.com> wrote in message
news:c36a9211-2f1a-46a7-a37f-3f272d2b210d@f40g2000pri.googlegroups.com...
Theres a resistor I used in the past but I don't know what its
called. It has a red body with no bands on it ie no lines and it
stays cool in high power applications. Does anyone know what it is
called? Thanks


It's probably called a "Power Resistor".

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

Life is like a roll of toilet paper; the closer it gets to the end, the faster
it goes.
 
Jack00 wrote:
Theres a resistor I used in the past but I don't know what its
called. It has a red body with no bands on it ie no lines and it
stays cool in high power applications. Does anyone know what it is
called? Thanks
If Dave called it right, it's more brown than red.
It's also visibly hollow.
Anything look familiar?
http://www.google.com/images?q=ohmite+power
 
On Mon, 2 Feb 2009 14:13:26 -0800 (PST), Jack00 <SPal508596@aol.com>
wrote:

Theres a resistor I used in the past but I don't know what its
called. It has a red body with no bands on it ie no lines and it
stays cool in high power applications. Does anyone know what it is
called? Thanks

Might it be one of these?
http://blog.makezine.com/tubetime_resistor_int.jpg

Lots of them in this photo.
These were some of the earliest resistors, and the body color as well
as the end colors and dots were the color code. It looks like they
were all hand painted back then.... what a monotonous job!

Look at this chart for the color codes on them.
http://www.victoryradio.com/zenith/images/old_resistor_codes.jpg

If I'm right, the red one on the picture would be a 250 ohm.

If you're speaking of power resistors, they are usually brown, but can
be other colors and normally have the ohms and wattage written on them
in text, although some of them seemed to lose their lettering from
heat. These buggers can get quite hot, and will burn your fingers.
These are wirewound, rather than the smaller ones being a carbon type.

LM
 
letterman@invalid.com wrote:

Look at this chart for the color codes on them.
http://www.victoryradio.com/zenith/images/old_resistor_codes.jpg

LM
Good grief ! 40+ years ago I used to have a copy of that page pinned to
the wall behind the bench to remind me of the value of the colours !

--
Best Regards:
Baron.
 

Welcome to EDABoard.com

Sponsor

Back
Top