REQ: Technics SA-310 Schematic

This stereo developed a hum in the right channel which fried the
braided leads going from my speaker terminals to the voice coil. Each
channel has an electrolytic 6800ľF capacitor which I've removed and
tested via a capacitance tester ( I don't have an oscilloscope) and
each measured between 6850 and 6600ľF.

I was going to dig deeper but without a schematic of this, I'm lost.
Does anyone know where I can get one?

Thanks,

 

[Michael A. Terrell]

gand0lph@middleearth.us wrote:

This stereo developed a hum in the right channel which fried the
braided leads going from my speaker terminals to the voice coil. Each
channel has an electrolytic 6800ľF capacitor which I've removed and
tested via a capacitance tester ( I don't have an oscilloscope) and
each measured between 6850 and 6600ľF.

I was going to dig deeper but without a schematic of this, I'm lost.
Does anyone know where I can get one?

Thanks,

My records show that I have this manual is in my inventory:

SA-310 [M] [MC] QUARTZ Synthesizer FM/AM Stereo Receiver

--
We now return you to our normally scheduled programming.

Take a look at this little cutie! ;-)
http://home.earthlink.net/~mike.terrell/photos.html

Michael A. Terrell
Central Florida

 

Is this a "users" manual or does it actually have schematics?

Thank you.

On Thu, 08 Jan 2004 07:05:14 GMT, "Michael A. Terrell"
<mike.terrell@earthlink.net> wrote:

gand0lph@middleearth.us wrote:

This stereo developed a hum in the right channel which fried the
braided leads going from my speaker terminals to the voice coil. Each
channel has an electrolytic 6800ľF capacitor which I've removed and
tested via a capacitance tester ( I don't have an oscilloscope) and
each measured between 6850 and 6600ľF.

I was going to dig deeper but without a schematic of this, I'm lost.
Does anyone know where I can get one?

Thanks,

My records show that I have this manual is in my inventory:

SA-310 [M] [MC] QUARTZ Synthesizer FM/AM Stereo Receiver