Replacement IC - Source Needed

C

Chris F.

Guest
Anyone know where I can find a good online source for a TA7272P IC? (Dual
motor control, in a '91 Sony tape deck). Seems a shame to junk a high-end
deck (HX Pro, full logic, etc) when it only needs an IC.
A pinout might also do. Since only one side of the chip is bad, I'd be
willing to rewire it so that deck B (the record deck) would work again.
Thanks for any advice.
 
MCM electronics has it TA7272 for $4.41 U.S. each. 1800 543 4330

Regards
Cyrus
"Chris F." <zappyman@hotmail.com> wrote in message
news:Sx3Ib.21581$IF6.949197@ursa-nb00s0.nbnet.nb.ca...
Anyone know where I can find a good online source for a TA7272P IC?
(Dual
motor control, in a '91 Sony tape deck). Seems a shame to junk a high-end
deck (HX Pro, full logic, etc) when it only needs an IC.
A pinout might also do. Since only one side of the chip is bad, I'd be
willing to rewire it so that deck B (the record deck) would work again.
Thanks for any advice.
 
TA7272P is $7.07 U.S. each at the mcm electronics.

Cyrus
"Cyrus" <CyrusM@fox.net> wrote in message
news:0F3Ib.42405$m83.22379@fed1read01...
MCM electronics has it TA7272 for $4.41 U.S. each. 1800 543 4330

Regards
Cyrus
"Chris F." <zappyman@hotmail.com> wrote in message
news:Sx3Ib.21581$IF6.949197@ursa-nb00s0.nbnet.nb.ca...
Anyone know where I can find a good online source for a TA7272P IC?
(Dual
motor control, in a '91 Sony tape deck). Seems a shame to junk a
high-end
deck (HX Pro, full logic, etc) when it only needs an IC.
A pinout might also do. Since only one side of the chip is bad, I'd be
willing to rewire it so that deck B (the record deck) would work again.
Thanks for any advice.
 
Is there any source for a pinout for this IC? I'd much rather just modify
the deck so that the B side works again, rather than put any money into it.
I'm outside the US, and most parts suppliers have a minimum order....

"Cyrus" <CyrusM@fox.net> wrote in message
news:0F3Ib.42405$m83.22379@fed1read01...
MCM electronics has it TA7272 for $4.41 U.S. each. 1800 543 4330

Regards
Cyrus
"Chris F." <zappyman@hotmail.com> wrote in message
news:Sx3Ib.21581$IF6.949197@ursa-nb00s0.nbnet.nb.ca...
Anyone know where I can find a good online source for a TA7272P IC?
(Dual
motor control, in a '91 Sony tape deck). Seems a shame to junk a
high-end
deck (HX Pro, full logic, etc) when it only needs an IC.
A pinout might also do. Since only one side of the chip is bad, I'd be
willing to rewire it so that deck B (the record deck) would work again.
Thanks for any advice.
 
All data sheet for TA7272P are here,
http://wwww.ges.cz/sheet/t/ta7272p.pdf

Hope this info helps
Cyrus
"Chris F." <zappyman@hotmail.com> wrote in message
news:etoIb.22015$IF6.981333@ursa-nb00s0.nbnet.nb.ca...
Is there any source for a pinout for this IC? I'd much rather just modify
the deck so that the B side works again, rather than put any money into
it.
I'm outside the US, and most parts suppliers have a minimum order....

"Cyrus" <CyrusM@fox.net> wrote in message
news:0F3Ib.42405$m83.22379@fed1read01...
MCM electronics has it TA7272 for $4.41 U.S. each. 1800 543 4330

Regards
Cyrus
"Chris F." <zappyman@hotmail.com> wrote in message
news:Sx3Ib.21581$IF6.949197@ursa-nb00s0.nbnet.nb.ca...
Anyone know where I can find a good online source for a TA7272P IC?
(Dual
motor control, in a '91 Sony tape deck). Seems a shame to junk a
high-end
deck (HX Pro, full logic, etc) when it only needs an IC.
A pinout might also do. Since only one side of the chip is bad, I'd
be
willing to rewire it so that deck B (the record deck) would work
again.
Thanks for any advice.
 

Welcome to EDABoard.com

Sponsor

Back
Top