Replacement for TA7200

J

Johan

Guest
I need a replacement for TA7200.

If there is no direct equivalents, then I want to make a "converter-board",
using an IC with similar specs, and fit this board into the place of the
original TA7200.

So....what IC's can I use for this ?


Please reply to my mail: pils@bluezone.no
(I'm not in here very often)

Thank you.
 
On Wed, 18 Jul 2007 23:51:57 +0200, "Johan" <pils@bluezone.no> put
finger to keyboard and composed:

I need a replacement for TA7200.

If there is no direct equivalents, then I want to make a "converter-board",
using an IC with similar specs, and fit this board into the place of the
original TA7200.

So....what IC's can I use for this ?


Please reply to my mail: pils@bluezone.no
(I'm not in here very often)

Thank you.
The NTE web site suggests NTE390 as a replacement, but this is an NPN
transistor, not an IC. OTOH my paper NTE catalogue suggests the
NTE1153 (= ECG1153).

This URL suggests RCA SK3283 as an equivalent:
http://www.weisd.com/store2/NTE1153.html

I'm not sure about this one, but you could have a look at the TA7205
(4 ohm, 18V):
http://www.nteinc.com/specs/1100to1199/pdf/nte1155.pdf
http://www.datasheetarchive.com/datasheet.php?article=3215863

Or TA7200 / TA7204 / TM1153 Audio Power Amplifiers:
http://malzev.tripod.com/comp/ta7200.htm

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
 

Welcome to EDABoard.com

Sponsor

Back
Top