Repair Memory Boards

I

Ian Munro

Guest
Anyone in Melbourne interested in and capable of replacing 7 surface
mount components on 5 memory boards?

4 are D case tantalum capacitors 8x4x3mm, 2 are SOT23 package format
marked '5A' and one resistor 2x1x0.5mm which would be a challenge with
a soldering iron.

Received a package of 128MB EDO ECC HP 9000 memory boards from Canada
that were not as well packaged as they could have been...

A case of beer if this is worth anyone's while.
 
Do you have the actual parts?
Is the board damaged?

It should not be a problem to replace those.

Rudolf

"Ian Munro" <imunro@netspace.net.au> wrote in message
news:vma040t974rclgrc5nckcfr33kcaqt2i7o@4ax.com...
Anyone in Melbourne interested in and capable of replacing 7 surface
mount components on 5 memory boards?

4 are D case tantalum capacitors 8x4x3mm, 2 are SOT23 package format
marked '5A' and one resistor 2x1x0.5mm which would be a challenge with
a soldering iron.

Received a package of 128MB EDO ECC HP 9000 memory boards from Canada
that were not as well packaged as they could have been...

A case of beer if this is worth anyone's while.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top