M
markus wolfgart
Guest
Hi NG,
I would like to get some hints concerning default failures of the
mentioned PSU model.
Is someone there who could send me a schematic of this part, or give me a
hint which connector is used to startup the unit in order to measure
the output voltage.
It's seems that the supply starts properly at 120V~ but source to much
current during start up at 230V~.
Many thanks in advance for your kind help.
Bye
Markus
I would like to get some hints concerning default failures of the
mentioned PSU model.
Is someone there who could send me a schematic of this part, or give me a
hint which connector is used to startup the unit in order to measure
the output voltage.
It's seems that the supply starts properly at 120V~ but source to much
current during start up at 230V~.
Many thanks in advance for your kind help.
Bye
Markus