Remote will not program.

  • Thread starter Terry Donaldson
  • Start date
T

Terry Donaldson

Guest
JVC multibrand remote control doesn't want to be programmed to work with a TV. With
the user manual beside me I program it - it refuses to work. I have an identical
remote, this one programs fine. What should I be doing?

LP20303-008 for JVC VCR HR-S38OOU
 
Sounds like you have a defective remote?

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


"Terry Donaldson" <Maple-Tree@fruits.com> wrote in message
news:393ec8cec82122a1a7c6c95ae2ba04dd@news.bubbanews.com...
JVC multibrand remote control doesn't want to be programmed to work with a
TV. With
the user manual beside me I program it - it refuses to work. I have an
identical
remote, this one programs fine. What should I be doing?

LP20303-008 for JVC VCR HR-S38OOU
 
"Terry Donaldson" <Maple-Tree@fruits.com> wrote in message
news:393ec8cec82122a1a7c6c95ae2ba04dd@news.bubbanews.com...
JVC multibrand remote control doesn't want to be programmed to work with a
TV. With
the user manual beside me I program it - it refuses to work. I have an
identical
remote, this one programs fine. What should I be doing?

LP20303-008 for JVC VCR HR-S38OOU
Have you checked the batteries?? Replace them with a known good set and
try again. Still doesn't work? Probably a bad remote.
Cheers!!
--
Tweetldee
Tweetldee at att dot net (Just subsitute the appropriate characters in the
address)

Never take a laxative and a sleeping pill at the same time!!
 
JVC multibrand remote control doesn't want to be programmed to work

Have you checked the batteries??
Yes. Should I use "D" batteries. How about three "D's" or 4.5vdc?
 

Welcome to EDABoard.com

Sponsor

Back
Top