Remote Ballast Cable

P

Phil

Guest
Hello , I have a outside HPS Security Light that has a noisy Ballast
Transformer and have purchased an Electronic Ballast to replace it , would
like to put the light sensor and Ballast in an Alum. container for Heat Sink
and weather ,at a level that could be serviced by myself , my question is
can I just run two 5 kv wires to the bulb or would I need to shield the lamp
feed wire because of RF etc. , the Light support pole is steel and Ballast
would be approx. 14 ft. from HPS Lamp and would be taped to the pole .
Thanks
Phil L.
 

Welcome to EDABoard.com

Sponsor

Back
Top