Real Time Protocol - RTP using FPGA

[Emil Imrith]

in my pc there is a DB with songs and i want to send/ transmit using RTP real time protocol to different devices so I want send media over RTP/UDP/IP using fpgas

 

[Emil Imrith]

On Monday, November 5, 2012 3:55:15 PM UTC-7, Emil Imrith wrote:

in my pc there is a DB with songs and i want to send/ transmit using RTP real time protocol to different devices so I want send media over RTP/UDP/IP using fpgas

I have the understanding of the RTP header
and I know there so ip libraries for ethernet networking
so I want to descript a hardware to transmit my media
probably I will need an encoder within ?

 

[Martin Thompson]

Emil Imrith <emrith@gmail.com> writes:

in my pc there is a DB with songs and i want to send/ transmit using RTP real time protocol to different devices so I want send media over RTP/UDP/IP using fpgas

Why do you want to use an FPGA for this? Unless you *need* an FPGA, I'd
avoid it...

http://electronics.stackexchange.com/questions/45466/compare-implementing-a-simple-automation-design-on-a-mcu-vs-an-fpga-cpld/45474#45474

Cheers,
Martin


--
martin.j.thompson@trw.com
TRW Conekt - Consultancy in Engineering, Knowledge and Technology
http://www.conekt.co.uk/capabilities/39-electronic-hardware

 

[rickman]

On 11/5/2012 5:57 PM, Emil Imrith wrote:

On Monday, November 5, 2012 3:55:15 PM UTC-7, Emil Imrith wrote:
in my pc there is a DB with songs and i want to send/ transmit using RTP real time protocol to different devices so I want send media over RTP/UDP/IP using fpgas



I have the understanding of the RTP header
and I know there so ip libraries for ethernet networking
so I want to descript a hardware to transmit my media
probably I will need an encoder within ?

Why not use a wire? They are low power and very inexpensive. They
don't require any coding either.

If you are talking about generating the RTP protocol, why not do that in
software in your PC? Isn't that where the music data base is? How
would you get the music into the FPGA?

Rick