RCA 27" CTC197AM

T

Troy Davis

Guest
I'm sure this is a simple one. The TV display is cut-off a little bit on
the left and right sides. Although this is subjective, it appears to be
getting worse. It is model F27685. Is there a vert/horiz adjustment on the
back (I see what appears to be 2 slots for a "hex-like" tool at the back).
If not, are there adjustments that can be made internally? I appreciate any
help you can offer.

--
Decumanus Maximus
E-mail: decumanusmaximus@hotmail.com

"Lack of planning on your part doesn't constitute an emergency on my part!"
 
Those hex adjustments are Focus ( top) and G2/Screen ( Bottom).......best to
not to tweak them if focus and black levels looks fine. :)


The width adjustment is menu controlled via service menus.

Email me directly with an address to send the procedure to.


--
==========================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
860-399-1861
860-664-3535 (fax)
jstielau@snet.net
========================
"If you push something hard enough it will fall over."
Fudd's First Law of Opposition - Sir Sidney Fudd


"Troy Davis" <decumanusmaximus@hotmail.com> wrote in message
news:NGhSb.324053$JQ1.108228@pd7tw1no...
I'm sure this is a simple one. The TV display is cut-off a little bit on
the left and right sides. Although this is subjective, it appears to be
getting worse. It is model F27685. Is there a vert/horiz adjustment on
the
back (I see what appears to be 2 slots for a "hex-like" tool at the back).
If not, are there adjustments that can be made internally? I appreciate
any
help you can offer.

--
Decumanus Maximus
E-mail: decumanusmaximus@hotmail.com

"Lack of planning on your part doesn't constitute an emergency on my
part!"
 

Welcome to EDABoard.com

Sponsor

Back
Top