P
PaulHam
Guest
Hi,all
I'm Paul Ham in Korea and have some difficulties in using ASMI_PARALLE
altera ip core.
Anyone who knows well this problem could advice to me.
I've used both single-byte write and page write.
My problem is on "busy" signal after write operation.
First, when I used page write(256 bytes) operation, the "busy" signal fro
ip core kept "high" during 30 us.
Second I tried to use single byte write operation, however, the ip cor
gave me the "busy" signal during 300 us !!
It's unbelievable and different from the asmi_parallel data sheet.
The data sheet shows that only 3 us is needed after single byte writ
operation.
So, I'd like to get some advice here what makes unexpected result.
The signals I give asmi_parallel ip core, the write/wren/addr/data ar
exact.
Thanks in advanced
Regards
Paul
---------------------------------------
Posted through http://www.FPGARelated.com
I'm Paul Ham in Korea and have some difficulties in using ASMI_PARALLE
altera ip core.
Anyone who knows well this problem could advice to me.
I've used both single-byte write and page write.
My problem is on "busy" signal after write operation.
First, when I used page write(256 bytes) operation, the "busy" signal fro
ip core kept "high" during 30 us.
Second I tried to use single byte write operation, however, the ip cor
gave me the "busy" signal during 300 us !!
It's unbelievable and different from the asmi_parallel data sheet.
The data sheet shows that only 3 us is needed after single byte writ
operation.
So, I'd like to get some advice here what makes unexpected result.
The signals I give asmi_parallel ip core, the write/wren/addr/data ar
exact.
Thanks in advanced
Regards
Paul
---------------------------------------
Posted through http://www.FPGARelated.com