ptp5186s picture problem

[Ian V]

Im not familiar with this problem bottom of video is bowed in about 6 inches
I have replace convergence ics It seems like pincushion in vertical section
Have never seen this symptom Vertical section uses a an5521 Ic. Does
anyone have a direction where to start troubleshooting.



Thanks in advanced

 

[Jerry G.]

The most common failures are capacitors in the convergence and scan
sections. You're best to use an ESR meter to check them, or to change them
as you go, in order to find all the bad ones.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


"Ian V" <riggers30@hotmail.com> wrote in message
newskthc.68$I52.50@newsfe2-gui.server.ntli.net...
Im not familiar with this problem bottom of video is bowed in about 6 inches
I have replace convergence ics It seems like pincushion in vertical section
Have never seen this symptom Vertical section uses a an5521 Ic. Does
anyone have a direction where to start troubleshooting.



Thanks in advanced