D
Don Winn
Guest
I have a PRO-910 with what appears to be a low voltage problem. If I power the
monitor up without video, it powers up fine and I can hear the high voltage
coming up and a delayed single click.. The front power switch will not turn the
unit off. If I plug it into a VGA video source, the HV supply shuts down and I
can now power the monitor off with the front switch. When I power it back on
with the video still applied, all I hear is the HV coming up, the power LED
lights and 1 second later the VH goes away and it starts clicking a relay on
the main PWB. Removing the video source by removing the video cable or turning
the computer off will allow HV to return and clicking stops.
Has anyone see a similar problem or know of a source for the schematic for the
Model 986M? It's a nice monitor and I would like to get this one going again.
Don
monitor up without video, it powers up fine and I can hear the high voltage
coming up and a delayed single click.. The front power switch will not turn the
unit off. If I plug it into a VGA video source, the HV supply shuts down and I
can now power the monitor off with the front switch. When I power it back on
with the video still applied, all I hear is the HV coming up, the power LED
lights and 1 second later the VH goes away and it starts clicking a relay on
the main PWB. Removing the video source by removing the video cable or turning
the computer off will allow HV to return and clicking stops.
Has anyone see a similar problem or know of a source for the schematic for the
Model 986M? It's a nice monitor and I would like to get this one going again.
Don