Protel unknow error: Duplicate Net Names

[Matt]

Hi,

I'm trying to make a design using buses but when I compil the file (which
includes different files). I get an error :
Duplicate Net Names Element[0]: CMDCAN (like on the error.jpg picture).
Is anyone know what mistake I've done?

You can see how I've make my bus on the protelprob picture.


Regards

Thank you

Matt

PS: files can be found here:

http://toutpourvotrepc.free.fr/protel

 

[Matt]

I've just solve the problem, but I don't really know what I've done...

Matt

"Matt" <kheops37@free.fr> a écrit dans le message de news:
44b25b0c$0$6142$626a54ce@news.free.fr...

Hi,

I'm trying to make a design using buses but when I compil the file (which
includes different files). I get an error :
Duplicate Net Names Element[0]: CMDCAN (like on the error.jpg picture).
Is anyone know what mistake I've done?

You can see how I've make my bus on the protelprob picture.


Regards

Thank you

Matt

PS: files can be found here:

http://toutpourvotrepc.free.fr/protel

 

[Brad Velander]

Matt,
it is good that you solved the problem, would be good to know the how
and why though. Your picture didn't show anything that should have caused
such an error but it may have been other elements on that same page or even
another page that was causing the duplicate error and message.

Just one suggestion for the future. From the posted jpgs I have to
assume that you are using either DXP or AD software. Not really Protel (it's
now Altium) and you should always post which version you are using so that
people can best understand the possible sources and solutions. There are
major differences between Protel P98, P99SE or even earlier versions and
Altium DXP/AD software.

--
Sincerely,
Brad Velander.

"Matt" <kheops37@free.fr> wrote in message
news:44b25eea$0$6153$626a54ce@news.free.fr...

I've just solve the problem, but I don't really know what I've done...