Protel DXP??

Ive drawn schematics, now what? How do I get PCB?
Compiling gives some errors because I want to leave some pins not
connected (pic16f84). Does compiling produce PCB?

 

[Brad Velander]

Have you ever read a manual or help file? Comic book?
Or you have just asked others to waste their time giving you all
the answers?
--
Sincerely,
Brad Velander

<orangeKDS@mail.ru> wrote in message
news:1122551754.687363.281790@g43g2000cwa.googlegroups.com...

Ive drawn schematics, now what? How do I get PCB?
Compiling gives some errors because I want to leave some pins
not
connected (pic16f84). Does compiling produce PCB?

 

[orange]

yes, I have been reading help file -its rubbish, didnt have the manual
when asked the question.
if your time is so valuable, you shouldn't have bothered to answer at
all especially in that way (no use at all)..
let the others choose themself if they wanna 'waste time' answering my
question.

 

Writers on here always seem to get sharp answers from Brad Velander on
anything vaguely sounding like a criticism of Protel (he's a Protel
groupie)

Prescott

 

[Brad Velander]

Yeah stick it Prescott,
Who rattled your chain? No it is the idiots here that get
sharp answers from me. Why don't you answer his question? Anyone
that asks completely vague open ended questions can't expect
someone else to do all the work for them.
Now, there was nothing in his initial question that belittled
Protel in any way. Did you ever figure out how to compare equal
versions and pricing of your beloved tool with Protel? Or do you
still want to fight about comparing apples and oranges, claiming
apples are cheaper, while they are not an orange (no pun with the
SCL poster intended)?


Orange,
In short the answer would too far too long and too dependant
on how your schematics were done, libraries and on and on. Then
it would lead to 50 more questions, probably before we even
started into your PCB. How did you get the schematics done, ask
someone else?

Are you using DXP? If you are, then you have absolutely no
excuses besides pure laziness, which was my initial suspicion.
Second suspicion, you have low morals because you probably have
pirated the software as well. You have no excuses at all, the
Altium website is loaded with tutorials, white papers, sample
files, training files and full manuals in PDF form. Even for
P99SE there are a few that will cover most of what you need to
get started, in their old software download area. So you steal
the software that we pay good money for and want improved, then
you expect others to support you. You are in a complex exposed
position aren't you.

If you come up with limited specific questions, then I will
offer assistance. I won't supplant the manual or help files
completely.

--
Sincerely,
Brad Velander

<DMBPrescott@aol.com> wrote in message
news:1123152020.372681.304820@o13g2000cwo.googlegroups.com...

Writers on here always seem to get sharp answers from Brad
Velander on
anything vaguely sounding like a criticism of Protel (he's a
Protel
groupie)

Prescott

 

"Yeah stick it Prescott, Who rattled your chain?"

What a delightful reply. I didn't bother reading the rest after seeing
that opening. Are you an engineer or an all-in wrestler...(as well as
a Protel groupie)....?

Prescott