Protel Autotrax and Win98

[Richard Hosking]

I have a (licensed!) copy of Autotrax which is now a bit long in the tooth,
but still works OK.
It has run happily under W95 for years, but I want to put it on a newer
computer with W98 - there sems to be problems with video drivers. The best I
can get is low res CGA
Anyone have later video drivers for this?

Thanks
Richard

 

[Alan]

On Wed, 10 Dec 2003 19:01:57 +0800, "Richard Hosking"
<richardh@iinet.net.au> wrote:

I have a (licensed!) copy of Autotrax which is now a bit long in the tooth,
but still works OK.
It has run happily under W95 for years, but I want to put it on a newer
computer with W98 - there sems to be problems with video drivers. The best I
can get is low res CGA
Anyone have later video drivers for this?

Thanks
Richard


Richard

Have a look at:
http://www.airborn.com.au/layout/easytrax.html

HTH

Alan


++++++++++++++++++++++++++++++++++++++++++
Jenal Communications
Manufacturers and Suppliers of HF Selcall
P O Box 1108, Morley, WA, 6943
Tel: +61 8 9370 5533 Fax +61 8 9370 5106
Web Site: http://www.jenal.com
e-mail: http://www.jenal.com/contact.php
++++++++++++++++++++++++++++++++++++++++++

 

[Richard Hosking]

Many thanks for this
It will regenerate the old program
It looks like there is a better output option file as well for plotting to a
laser printer.

Richard

Alan <me@somewhere.com.au> wrote in message
news:be4etvkmtjmolflr62310h6rddcqd6007c@4ax.com...

On Wed, 10 Dec 2003 19:01:57 +0800, "Richard Hosking"
richardh@iinet.net.au> wrote:

I have a (licensed!) copy of Autotrax which is now a bit long in the
tooth,
but still works OK.
It has run happily under W95 for years, but I want to put it on a newer
computer with W98 - there sems to be problems with video drivers. The
best I
can get is low res CGA
Anyone have later video drivers for this?

Thanks
Richard


Richard

Have a look at:
http://www.airborn.com.au/layout/easytrax.html

HTH

Alan


++++++++++++++++++++++++++++++++++++++++++
Jenal Communications
Manufacturers and Suppliers of HF Selcall
P O Box 1108, Morley, WA, 6943
Tel: +61 8 9370 5533 Fax +61 8 9370 5106
Web Site: http://www.jenal.com
e-mail: http://www.jenal.com/contact.php
++++++++++++++++++++++++++++++++++++++++++

 

[Richard Hosking]

I have managed to get the program running well under W98, but now I find the
schematic libraries are reported as a "bad file format" and they wont load.
This in spite of reloading the libraries from disk. Has anyone faced this
problem? Was there a solution?

Thanks
Richard

Richard Hosking <richardh@iinet.net.au> wrote in message
news:3fd6fdc7$1$1746$5a62ac22@freenews.iinet.net.au...

I have a (licensed!) copy of Autotrax which is now a bit long in the
tooth,
but still works OK.
It has run happily under W95 for years, but I want to put it on a newer
computer with W98 - there sems to be problems with video drivers. The best
I
can get is low res CGA
Anyone have later video drivers for this?

Thanks
Richard

 

[Chaos Master]

Richard Hosking(richardh@iinet.net.au) spoke, er, wrote:

I have managed to get the program running well under W98, but now I find the
schematic libraries are reported as a "bad file format" and they wont load.
This in spite of reloading the libraries from disk. Has anyone faced this
problem? Was there a solution?

*I think* it's caused by a FAT32 file system or long file names, or installing
in a big hard drive. Or the files may be just corrupted.

--

 

[Richard Hosking]

I reinstalled from the original disk - so they should not be corrupted. I
have an 80GB drive - I guess that could be relevant. Filenames are the same
as original - not longer than 8 characters. Any ideas on solutions?

Thanks
Richard


Chaos Master <please.ask@ibestvip.com.br> wrote in message
news:MPG.1a46fa05dccf199b98984d@news.cis.dfn.de...

Richard Hosking(richardh@iinet.net.au) spoke, er, wrote:
I have managed to get the program running well under W98, but now I find
the
schematic libraries are reported as a "bad file format" and they wont
load.
This in spite of reloading the libraries from disk. Has anyone faced
this
problem? Was there a solution?

*I think* it's caused by a FAT32 file system or long file names, or
installing
in a big hard drive. Or the files may be just corrupted.

--

 

[Apollo]

"Richard Hosking" <richardh@iinet.net.au> wrote

I reinstalled from the original disk - so they should not be corrupted. I
have an 80GB drive - I guess that could be relevant. Filenames are the same
as original - not longer than 8 characters. Any ideas on solutions?

I run autotrax, and autotrax schematic, with libraries
for both - there is definitely no problem with long file
names, or having the programs on a large drive (etc).

However, the libraries for protel autotrax and protel
schematic are seperate, just like the PCB editor and
schematic editor programs themselves - and if you try
and load the library using the wrong program you will
get the error you describe.

I have a list of other stuff to watch out for! ...
http://www.airborn.com.au/layout/autotbug.html

Regards
Steve