Programming a Dranetz 626

D

DaveC

Guest
Acquired a basic 626 power analyzer. After fixing up the thermal printer --
which works fine now -- I want to program thresholds etc. I'd start with the
clock but it turns out that all the PDFs I've gathered don't show a single
step re. programming. They are all basically catalogs of plug-in cards
available for the 626 and what they each can do.

Anybody have 626 documentation that shows setup & programming?

(And please, no replies re. "That is so old you're lucky to find
anything...". That goes WITHOUT SAYING.)

Thanks,
Dave
 
"DaveC" <invalid@invalid.net> wrote in message
news:0001HW.CD519397065066F4B01029BF@news.eternal-september.org...
Acquired a basic 626 power analyzer. After fixing up the thermal
printer --
which works fine now -- I want to program thresholds etc. I'd start with
the
clock but it turns out that all the PDFs I've gathered don't show a single
step re. programming. They are all basically catalogs of plug-in cards
available for the 626 and what they each can do.

Anybody have 626 documentation that shows setup & programming?

(And please, no replies re. "That is so old you're lucky to find
anything...". That goes WITHOUT SAYING.)

Thanks,
Dave

Hi Dave,
Click to expand...

I also have a 626. Maybe you (or I?) can start a yahoo group for Dranetz
where we can share some information and manuals?
They are pretty nice units with many options. Seems to be a flood of cheap
supplies.

tm
 
I also have a 626. Maybe you (or I?) can start a yahoo group for Dranetz
where we can share some information and manuals?
Click to expand...
You first. (c;

I just received a reply to my request: a few 626 "quick start" guides -- it's
not the complete user guide and makes reference to being sure to read the
u.g. (!) . It covers front panel controls and basic programming of each card.
Do you need these PDFs? Post an email address (sufficiently obfuscated to
avoid being vacuumed by the spam bots) and I'll send them to you.

They are pretty nice units with many options. Seems to be a flood of cheap
supplies.

tm
Click to expand...
I resurrected the thermal printer by scrubbing the print head with alcohol
and a brush. Prints like new. Paper travel without crinkling is a bit fiddly,
but once it gets going it seems to self-center.

Do you have a parts mule? I need the plastic side panel under the carry
handle (about 3.5 x 15 inches).

Cheers,
Dave
 
Do you have a parts mule? I need the plastic side panel under the carry
handle (about 3.5 x 15 inches).
Click to expand...
And front and rear travel covers!

Dave
 
"DaveC" <invalid@invalid.net> wrote in message
news:0001HW.CD523DF8067855F3B01029BF@news.eternal-september.org...
I also have a 626. Maybe you (or I?) can start a yahoo group for Dranetz
where we can share some information and manuals?

You first. (c;

I just received a reply to my request: a few 626 "quick start" guides --
it's
not the complete user guide and makes reference to being sure to read the
u.g. (!) . It covers front panel controls and basic programming of each
card.
Do you need these PDFs? Post an email address (sufficiently obfuscated to
avoid being vacuumed by the spam bots) and I'll send them to you.

They are pretty nice units with many options. Seems to be a flood of
cheap
supplies.

tm

I resurrected the thermal printer by scrubbing the print head with alcohol
and a brush. Prints like new. Paper travel without crinkling is a bit
fiddly,
but once it gets going it seems to self-center.

Do you have a parts mule? I need the plastic side panel under the carry
handle (about 3.5 x 15 inches).

Cheers,
Dave
Click to expand...
Ok, I will set it up. I have very little information on the unit, mostly
setup stuff.

No to the parts question but I do see these show up cheap on ebay.

I guess I'll call it the "Dranetz user group".

tm
 
"tm" <No_one_home@white-house.gov> wrote in message
news:kgj32q$b60$1@dont-email.me...
"DaveC" <invalid@invalid.net> wrote in message
news:0001HW.CD523DF8067855F3B01029BF@news.eternal-september.org...
I also have a 626. Maybe you (or I?) can start a yahoo group for Dranetz
where we can share some information and manuals?

You first. (c;

I just received a reply to my request: a few 626 "quick start" guides --
it's
not the complete user guide and makes reference to being sure to read the
u.g. (!) . It covers front panel controls and basic programming of each
card.
Do you need these PDFs? Post an email address (sufficiently obfuscated to
avoid being vacuumed by the spam bots) and I'll send them to you.

They are pretty nice units with many options. Seems to be a flood of
cheap
supplies.

tm

I resurrected the thermal printer by scrubbing the print head with
alcohol
and a brush. Prints like new. Paper travel without crinkling is a bit
fiddly,
but once it gets going it seems to self-center.

Do you have a parts mule? I need the plastic side panel under the carry
handle (about 3.5 x 15 inches).

Cheers,
Dave


Ok, I will set it up. I have very little information on the unit, mostly
setup stuff.

No to the parts question but I do see these show up cheap on ebay.

I guess I'll call it the "Dranetz user group".

tm
Click to expand...
Ok, done. Here:
http://groups.yahoo.com/group/Dranetz_UG

tm
 
http://groups.yahoo.com/group/Dranetz_UG
Click to expand...
Make sure you make it moderated. Otherwise the only posts to the group will
be spam.

We're now a Yahoo group of 2!

D
 
"DaveC" <invalid@invalid.net> wrote in message
news:0001HW.CD526F280683DD28B01029BF@news.eternal-september.org...
http://groups.yahoo.com/group/Dranetz_UG

Make sure you make it moderated. Otherwise the only posts to the group
will
be spam.

We're now a Yahoo group of 2!

D
Click to expand...
If there is spam, I'll turn on the moderation. Right now you only need to be
a member.

I tried to upload a user manual but it was over 5 megs and was rejected. It
is just under 7 megs. If you can take an attachment, I'll converse with you
through the group.

When I got mine, it was very dirty inside. Also, the nicads were dead. I got
it all working now so need to do some studying in the reading room sometime.


Have fun,
T
 
ftp://ftp.dranetz-bmi.com/mkellom/OldDranetz/626manDoc.pdf

--
Paul Hovnanian mailto:paul@Hovnanian.com
------------------------------------------------------------------
Free the Mallocs!
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top