B
Bart
Guest
I need to program an obsolete Lattice component, the MACH211-15JC.
I would like to do this with the software tool ispLEVER v3.0
Problem is that I cannot select that device out of the list with the
available devices.
In ispLEVER I can choose for the MACH211SP, but (in my case) I can't
use it.
The MACH211SP is ISP and there are pin 13 and 35 (and another few)
reserved for JTAG configuration.
I need absolutely to program the MACH211-15JC because I have to
reprogram the device which is used in an older hardware application.
And of course, I need pin 13 and 35 as input ports.
So question is, which device do I have to select, or are there some
files which I have to install to make the device available in the
list.
So if anyone can help me, I would appreciate it very well.
Bart
I would like to do this with the software tool ispLEVER v3.0
Problem is that I cannot select that device out of the list with the
available devices.
In ispLEVER I can choose for the MACH211SP, but (in my case) I can't
use it.
The MACH211SP is ISP and there are pin 13 and 35 (and another few)
reserved for JTAG configuration.
I need absolutely to program the MACH211-15JC because I have to
reprogram the device which is used in an older hardware application.
And of course, I need pin 13 and 35 as input ports.
So question is, which device do I have to select, or are there some
files which I have to install to make the device available in the
list.
So if anyone can help me, I would appreciate it very well.
Bart