Problems with soc encounter output to Magic

[renee]

I had problems when I exported the routing results from soc encounter
to Magic.

In the SoC encounter, after verifying the results, I saved the design
in GDS format, and read it into Magic. But it said that there were
instances as control_VIA0 and control_VIA1, which I think were the
generated vias instances. But I don't have these vias defined in
Magic, so when I read the stream file in Magic, it said that it cannot
find the cell control_VIA0 and control_VIA1.

Meanwhile, in the soc encounter, the wires indeed connected to the
edge of the cell, but when it was imported into Magic, some wires
extended over the edge of the cell, while some did not. I don't know
why it happened.

Thanks in advance!



Renee