Problems with DCM in Aptivia

  • Thread starter Anna-Charlotta Klevbrink
  • Start date
A

Anna-Charlotta Klevbrink

Guest
Hi!

When I do "Generate & Run" I end up with a lot of error messeges that
says:
"Error: *Error* openResults: too many arguments (at most 1 expected, 2
given)". One for every step in the simulation. What should I do to solve
this problem?

How do I add a process model file as a project parameter (or define it)?


Thanks in advance

Anna Klevbrink
 
Hi Anna,

This means you are using a version of the IC tools with Aptivia which is
not new enough. It uses a new internal argument to the openResults()
function which didn't used to be there. You need:

Aptivia dfII
3.1 446 MSR9 or later
3.1.1 446 MSR10 or later
3.2 446 MSR10 or later, 5.0.32 or later

If "icfb -W" returns 5.0.32.* (not 5.0.0.*), then you should be OK.

Andrew.

On Thu, 02 Oct 2003 11:26:16 +0200, Anna-Charlotta Klevbrink
<annkl614@isy.liu.se> wrote:

Hi!

When I do "Generate & Run" I end up with a lot of error messeges that
says:
"Error: *Error* openResults: too many arguments (at most 1 expected, 2
given)". One for every step in the simulation. What should I do to solve
this problem?

How do I add a process model file as a project parameter (or define it)?


Thanks in advance

Anna Klevbrink
--
Andrew Beckett
Senior Technical Leader
Custom IC Solutions
Cadence Design Systems Ltd
 

Welcome to EDABoard.com

Sponsor

Back
Top