Problems installing ISE 6.2 under Linux

A

Arthur Sharp

Guest
Hi,
I'm trying to install the ISE 6.2 update under Linux.
My current version is 6.1 with no updates,
straight from the CDs.

I get the following message :
"Xilinx Service Pack 6.2.01i Setup cannot be installed over Xilinx install
versions older than 6.2i."

Since I have 6.1, this shouldn't happen.

I found the following in the answer database :
http://support.xilinx.com/xlnx/xil_ans_display.jsp?iLanguageID=1&iCountryID=
1&getPagePath=18151

but it doesn't really help as it should be already fixed and, besides, the
$$XILINX
variable seems to be set ok.

I tried the obvious things mentioned in other answers like killing
the wind processes and deleting .windu*, to no avail.

I'm stuck, can anyone help ?
Maybe I need to install other 6.1 updates before 6.2?

Thanks,

Arthur
 
I installed 6.1.03 without problems, but 6.2 still refused to install giving
the
same message as before.

Arthur
"Arthur Sharp" <arthur@nospam.com> wrote in message
news:407790b6$0$25655$afc38c87@news.optusnet.com.au...
Hi,
I'm trying to install the ISE 6.2 update under Linux.
My current version is 6.1 with no updates,
straight from the CDs.

I get the following message :
"Xilinx Service Pack 6.2.01i Setup cannot be installed over Xilinx install
versions older than 6.2i."

Since I have 6.1, this shouldn't happen.

I found the following in the answer database :

http://support.xilinx.com/xlnx/xil_ans_display.jsp?iLanguageID=1&iCountryID=
1&getPagePath=18151

but it doesn't really help as it should be already fixed and, besides, the
$$XILINX
variable seems to be set ok.

I tried the obvious things mentioned in other answers like killing
the wind processes and deleting .windu*, to no avail.

I'm stuck, can anyone help ?
Maybe I need to install other 6.1 updates before 6.2?

Thanks,

Arthur
Click to expand...
 
I'm trying to install the ISE 6.2 update under Linux.
My current version is 6.1 with no updates,
straight from the CDs.

I get the following message :
"Xilinx Service Pack 6.2.01i Setup cannot be installed over Xilinx install
versions older than 6.2i."

Since I have 6.1, this shouldn't happen.
Click to expand...
You need to install ISE 6.2 first before you can install the service pack 1.

HTH,
Jim
jimwu88NOOOSPAM@yahoo.com
http://www.geocities.com/jimwu88/chips
 
Thanks, you must be right : I assumed that 6.2 was just an update for 6.1.
I need to install the CDs first and then the service pack.

Arthur

"Jim Wu" <NOSPAM@NOSPAM.com> wrote in message
news:amuec.39052$1y1.3707@nwrdny03.gnilink.net...
.


You need to install ISE 6.2 first before you can install the service pack
1.

HTH,
Jim
jimwu88NOOOSPAM@yahoo.com
http://www.geocities.com/jimwu88/chips
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top