Problem with power management circuit in Dell 2407 WFP Monit

J

Jack B. Pollack

Guest
I have a Dell 2407 WFP Monitor. Lately it has been acting funny. Most of the
time when turn on the PC the monitor comes out of stand-by and I get the
Dell logo, then I see the Windows boot logo for a brief instant and the
monitor turns off. If I press the power button it comes on for another brief
second and then turns off again. Pressing the power button several more
times (and holding it in, dont know if this really does anything) I can
usually get it to stay on. This happens about 80% of the time when I turn it
on after it has been off all night (I dont have the problem if I just shut
down for a brief time).

The problem is definitely the monitor as I have confirmed this using several
computers.
I have tried setting the monitor back to factory defaults.


It looks like this may be "common" problem with this monitor as I see
several similar posts on the net.

Wondering if anyone has run into this problem and if they have a solution.
 
Never mind. I got Dell to replace it for free!

"Jack B. Pollack" <N@NE.nothing> wrote in message
news:vs-dnTLqoJ2OfKXWnZ2dnUVZ_g6dnZ2d@earthlink.com...
I have a Dell 2407 WFP Monitor. Lately it has been acting funny. Most of
the time when turn on the PC the monitor comes out of stand-by and I get
the Dell logo, then I see the Windows boot logo for a brief instant and the
monitor turns off. If I press the power button it comes on for another
brief second and then turns off again. Pressing the power button several
more times (and holding it in, dont know if this really does anything) I
can usually get it to stay on. This happens about 80% of the time when I
turn it on after it has been off all night (I dont have the problem if I
just shut down for a brief time).

The problem is definitely the monitor as I have confirmed this using
several computers.
I have tried setting the monitor back to factory defaults.


It looks like this may be "common" problem with this monitor as I see
several similar posts on the net.

Wondering if anyone has run into this problem and if they have a solution.
 
In article <vs-dnTLqoJ2OfKXWnZ2dnUVZ_g6dnZ2d@earthlink.com>,
N@NE.nothing says...
I have a Dell 2407 WFP Monitor. Lately it has been acting funny. Most of the
time when turn on the PC the monitor comes out of stand-by and I get the
Dell logo, then I see the Windows boot logo for a brief instant and the
monitor turns off. If I press the power button it comes on for another brief
second and then turns off again. Pressing the power button several more
times (and holding it in, dont know if this really does anything) I can
usually get it to stay on. This happens about 80% of the time when I turn it
on after it has been off all night (I dont have the problem if I just shut
down for a brief time).

The problem is definitely the monitor as I have confirmed this using several
computers.
I have tried setting the monitor back to factory defaults.


It looks like this may be "common" problem with this monitor as I see
several similar posts on the net.

Wondering if anyone has run into this problem and if they have a solution.
Could be it needs a new lamp for the LCD screen.
 

Welcome to EDABoard.com

Sponsor

Back
Top