problem with CDL export using icfb menu!

B

bsrin

Guest
Hi All,
I am facing problem with CDL Export . I want netlist of a
particular schematic but the resultant netlist doesnot consists of
DIODES where as schematic consists of diodes. I am generating netlist
using icfb->file->export->cdl , and giving inputs as schematic
library , cellname, viewname. Please give me advice , what to do ?

Thanks in Advance.
bsrin
 
bsrin schrieb:
Hi All,
I am facing problem with CDL Export . I want netlist of a
particular schematic but the resultant netlist doesnot consists of
DIODES where as schematic consists of diodes. I am generating netlist
using icfb->file->export->cdl , and giving inputs as schematic
library , cellname, viewname. Please give me advice , what to do ?

Thanks in Advance.
bsrin
Click to expand...
Hi,

maybe check your logfile for any signs of problems. Or show it to us
and we could suggest something.

Marc
 
Hi Marc,
I have checked icfb log file and CDL environment
setting file "si.env" , but still I'm not able to find where is
problem. In log file some of warnings like "xxxxxx.cxt" file
already loaded .... I thing we can ignore these type of warnings.
In the form when we click on export->CDL , I have filled some of
fields like, type---analog ,netlist output - "xxx.cdl" , schematic
inputs like library , name, view, also switched on buttons of diode
(both), capacitor (area) identification ,and also added Include file
"./source.added" .
Marc , Is any thing other files I have to add?

When I am creating netlist using "Tools -> Analog Environment ->
simulation-> create netlist " , It giving the diode specification .
But could not in CDL..... ?

Thanks ....
bsrin.
 
On Nov 10, 8:57 am, bsrin <venki.ba...@gmail.com> wrote:
Hi Marc,
            I have checked  icfb log file  and  CDL environment
setting file "si.env" , but still I'm not able to find where is
problem.  In log file  some of warnings like  "xxxxxx.cxt" file
already loaded  ....  I thing we can ignore these type of warnings.
In the form when we click on export->CDL , I have filled some of
fields like, type---analog ,netlist output - "xxx.cdl" , schematic
inputs like library , name, view,  also switched on buttons of diode
(both), capacitor (area) identification ,and also added  Include file
"./source.added" .
 Marc , Is any thing other files I have to add?

When I am creating netlist using "Tools -> Analog Environment -
simulation-> create netlist  "  , It giving the diode specification .
But could not in CDL..... ?

Thanks ....
bsrin.
Click to expand...
use aucdl
 
Hi ansalsha,
What is this aucdl... Where can i found about this . Can u
tell me what pdf should i refer .

Thanks,
 
bsrin schrieb:
Hi ansalsha,
What is this aucdl... Where can i found about this . Can u
tell me what pdf should i refer .

Thanks,
Click to expand...
For CDL export check <install_dir>/doc/transref/transref.pdf
 
For CDL export check <install_dir>/doc/transref/transref.pdf
Click to expand...
Thank you . Really wondered by the reply what I get. Thank you
Marc .....
 
On Nov 10, 8:47 am, bsrin <venki.ba...@gmail.com> wrote:
For CDL export check <install_dir>/doc/transref/transref.pdf

Thank you .  Really wondered by the reply what I get.  Thank you
Marc .....
Click to expand...
I would look at the CDF's for the diodes, if the device properties are
not defined correctly, then the device will not net list.
Create a test schematic with one diode and see if it completes. The
log file would be very helpful to isolate the issue.

Good Luck

Rick
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top